723865
3
Zoom out
Zoom in
Previous page
1/21
Next page
3
This Honeywell Two Position Heater requires no assembly. Simply unpack heater and save all
packaging materials for off-season storage.
BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE TRIPPED OVER BY
CHILDREN OR PETS.
SET-UP
Turn off the heater.
Allow it to cool for ten minutes.
Unplug heater and move. This heater is equipped with a Cool Touch Handle for your convenience.
MOVING THE HEATER
OPERATION
NOTE: NEVER LEAVE AN OPERATING UNIT UNATTENDED
The Two Position Heater is designed to fit the
space for which it is needed. It can either
operate in the upright position or on its side.
Model HHF175 Series – Manual
Two Position Heater Operation
With the Power Knob in the OFF ( ) position, plug
the heater into a polarized 120V outlet.
DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET;
it will only fit one way.
The Power Knob is equipped with three (3) settings: Fan Only (
),
Low (
) and High ( ). The Low ( ) heat setting uses 750 watts
of power and the High (
) heat setting uses 1500 watts of power.
The Fan only (
) setting uses very low power and does not provide
heat. You can select the proper setting to accommodate your comfort
level with the Power Knob. When you choose any setting the red Power
Light will come on. Because the Low (
) heat setting does not require
as much electricity to operate, it is more energy efficient and may be a
better option if you are concerned about the amperage draw on a circuit
when the heater is on the High setting.
Turn the Thermostat Control fully clockwise to the highest setting.
When the room reaches a comfortable temperature, slowly turn the Thermostat Control counter-
clockwise until the heating element goes off (the red Power Light will not be shut off). This
is the point at which the Thermostat setting equals the room temperature. At this setting, the
Thermostat will automatically turn the heater on and off to maintain the selected temperature.
Turn the Power Knob to OFF (
) and unplug the heater when you are finished using it.
Heat Setting
Thermostat Control
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HHF175 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HHF175 Series in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info