Manual Honeywell HFD280 (page 3 of 18) (English, French, Spanish)

723810

Zoom out

Zoom in

1/18

CONTROLS THAT DO THE THINKING FOR YOU

CONTROLS THAT DO THE THINKING FOR YOU (CONTINUED)

Auto-off Timer

Sleep/Quiet

Setting

General Cleaning

Setting

Check Filters

Reset Button

Allergen Reduction

Setting

Max Cleaning Setting

Purification Level

Button

Oscillation Button

Light Dimmer

Button

Power Button

HFD28X Series

Purification Level Button – Once you have pressed the Power Button, use the Purification Level Button

( ) to select the desired air cleaning level. Your air cleaner will start on the General Cleaning setting each

time you turn the air cleaner on. Continue to press the ( ) button to cycle through cleaning levels to reach

the desired setting. Here is a handy reference to help get the most out of your air cleaner’s performance:

LEVEL 4 - MAX

Best for power cleaning the air when unpleasant odors are noticeable, your room is particularly dusty, or you

can sense that airborne particles are present. This setting cleans the air the fastest of all the settings and can

circulate the air frequently in the room.

LEVEL 3 - ALLERGEN

This setting makes the air cleaner perform at the proper level for reducing many types of airborne allergens.

It ensures the allergen capturing efficiency and rate are best for the particle sizes being captured. Best for

fighting airborne allergens during high allergen season, particularly in the spring and fall to help reduce

airborne pollen. Also great for year-round reduction of pet dander allergens.

LEVEL 2 - GENERAL

Best for General Cleaning. Use this setting to help reduce airborne dust and smoke particles, like those from

cooking or tobacco smoke.

LEVEL 1 - SLEEP

Best for ultra quiet operation, perfect for nighttime use when sleeping.

Oscillate Button – To help circulate fresher, cleaner air through the room, this unit has an oscillation feature.

To turn Oscillation on, simply press the Oscillation button ( ) once. To turn Oscillation off, press the

button again.

Auto-off Timer Button – Push the ( ) button if you would like your air cleaner to run and then automatically

shut-off after a certain amount of time (choose from between 2, 4 and 8 hours). This is convenient if you

would like your air cleaner to run during the night but then shut-off automatically in the morning (choose the

8 hour setting).

Dimmer Button – ( ) allows you to adjust the brightness of the LED display on the control panel. You may

wish to adjust the brightness depending on the room where the unit is placed.

• The unit always turns on with brightness on HIGH

• The LED lights cannot be turned completely off

• Press the ( ) button once and LED display will dim to Low setting

• Pressing the ( ) button a 2nd time will turn the LED light brightness back to HIGH.

Check Filters Button – When it is time to check and clean the filters, an indicator light will illuminate.

When this light comes on, you will need to clean the primary ifD

filter and clean or replace the pre-filter.

(See Filter Cleaning instructions on pages 6-7). It is recommended that you periodically check the filters.

Depending on operating conditions, the filters should be cleaned every 3 months. If you have chosen to

use the Odor & VOC Reducing

Pre-filter, it is not washable and should be replaced after 3 months. After

you have cleaned or replaced the filters, you will need to RESET the Electronic Filter Check.

To RESET the Electronic Filter Check:

After the ifD

filter and pre-filter have been cleaned/replaced and re-installed in the unit, plug the unit into the

power outlet with the unit still in POWER OFF mode, press and hold the CHECK FILTERS RESET button for 3

seconds. The CHECK FILTERS red LED will flash twice and shut off indicating the filter check has been reset. The

red LED will no longer be illuminated. The cleaning intervals are intended as guidelines only. Performance of any

filter media is dependent upon the concentration of contaminants going through the system. High concentrations

of contaminants such as dust, pet dander and smoke particles will reduce the useful performance of the filter

and they may need to be cleaned more frequently.

REMOVING THE FILTERS

CAUTION: Turn off the unit and wait 60 seconds before removing

the grille to clean filters.

The ifD

filter comes installed inside the air cleaner.

• Turn-off the air cleaner. Wait 60 seconds and unplug the unit before

removing the grille.

• Press down on the tab on the rear grille and pull the grille down and

toward you. Remove the grille.

• With one hand, hold the air purifier steady and use other hand to grasp

ifD

filter by the molded plastic handle at top and pull out. (Fig. 3)

• To place the ifD

filter back into the air cleaner housing, insert at

bottom and ensure it is pushed in as far as it can go, then push in

from the top. You will hear an audible “click”.

• Return the rear grille to the purifier housing. You will hear an audible “click” when the grille is

installed correctly.

Fig. 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HFD280 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell HFD280 Manual

Product: