723827

Honeywell HEV615 series Manual

3
Zoom out
Zoom in
Previous page
1/29
Next page
4 5
Option 1: To Fill Tank at the Humidifier
1. Pour cool water from a pitcher or jug directly into the Water Tank. It is not necessary
to remove the Tank Cover. DO NOT overfill.
CAUTION: DO NOT pour water into the Grill
Option 2: To Fill Tank at the Sink
1. Grasp Tank Handle and pull Tank forward to remove from Base. Carry Tank to sink.
2. Remove Tank Cover if desired. Tank may also be filled through the openings in the
Tank Cover.
3. Fill Tank with cool water. DO NOT overfill. Replace the Tank Cover if it was removed.
4. Carry Water Tank back to humidifier and replace on Base.
CAUTION: Use care when handling Water Tank to avoid unnecessary impact.
Banging or dropping the Water Tank could result in damage to the Tank that
may cause leaking.
This humidifier uses a float system to regulate the water flow from the Tank to the Reservoir.
The Float Paddle must be properly installed for the unit to operate. If not properly installed,
water may not flow into the Reservoir or it may leak from the Base. The Float Paddle is
designed to be easy to install and remove.
CAUTION: Improper placement of the Float Paddle could result in leaking or water
not feeding to the Reservoir.
1. Remove Water Tank.
2. Line up Float Paddle with the float paddle shape on the bottom of the Reservoir.
3. Place Float Rod over the Brackets and press firmly until you hear it click into place.
4. Pull gently up on the Float Rod to be sure it doesn’t pop out of the Brackets.
5. Place Water Tank back in Base.
Float Paddle Installation – required for humidifier to operate
Both filling options can be performed with or without the Tank Cover in place. Be sure to
replace the Cover before using the humidifier to keep opjects and debris out of the water.
Note:
Ensure the Float Paddle has been placed correctly in the Reservoir before filling.
See Float Paddle Installation instructions if necessary
Consumer assumes all responsibility for property damage resulting from improperly
filled humidifier.
FILLING/REFILLING THE WATER TANK
FILLING/REFILLING THE WATER TANK (CONTINUED)
The Tank can be filled in two ways:
Option 1: At the Humidifier Option 2: At the Sink
DO NOT ADD ESSENTIAL OILS to the water tank. Doing so could cause damage to the
humidifier and void the warranty.
This humidifier holds a maximum of 1.7 gallons (6.4 liters) of water.
Option 2
Step 4
Step 1
Step 2
Step 3
SETTING UP YOUR HUMIDIFIER
Step 2
Step 1
x
✔
Option 1
Unpack the Humidifier
Keep this instruction manual for reference.
1. Remove packaging materials. Locate
Float Paddle and set aside. This is
required for operation.
2. Remove twist tie and extend power cord.
Place on a firm, level, water resistant
surface a minimum of 12 inches (30 cm) from walls.
Step 1
Step 2
Step 5
Step 1
Step 3
Step 4
Float
Paddle
Float
Rod
Brackets
“Click”
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HEV615 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HEV615 series in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 18,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info