590724
1
Zoom out
Zoom in
Previous page
1/2
Next page
Document 800-05024 Rev A 11/09
Handleiding snelle installatie
Ultra Wide Dynamic Range mini dome
dag/nacht camera
Document 800-05024 Rev A 11/09
Gefeliciteerd met de aanschaf van uw Honeywell Ultra Wide Dynamic Range mini
dome dag/nacht camera. Controleer voordat u de camera installeert of dit het juiste
model is, en lees deze handleiding zorgvuldig door.
Alles uitpakken
Model Signaalindeling Lens
HD3U NTSC 2,8 tot 10,5 mm varifocus auto-iris lens
HD3UX PAL 2,8 tot 10,5 mm varifocus auto-iris lens
U hebt ook een kruiskopschroevendraaier en een kniptang nodig.
HD3U/X-camera Gebruikers-
handleiding
Kabel
servicemonitor
Bevestigings-
schroeven
Montageplaat
1 Verwijder de beschermkap
Voordat u uw HD3U/X kunt monteren of instellen, moet u eerst de beschermkap
verwijderen. Steek een munt of een schroevendraaier in de sleuf op de beschermkap,
en draai deze een kwartslag om de beschermkap van het camerahuis te wrikken
.
2 De camera monteren
De HD3U/X-camera is ontworpen om aan het oppervlak van een muur of
plafond te worden gemonteerd.
1. Bevestig de montagesjabloon
aan de muur of het plafond.
2. Boor vier gaten volgens de
montageplaat en plaats twee
pluggen (niet meegeleverd) in
de boorgaten.
3. Trek de voedings- en videokabel
door naar de aansluitingen. (Zie
"Aansluiten van de bedrading".)
4. Gebruik de vier schroeven
(meegeleverd) om de camera
aan de muur of het plafond te
monteren.
Opmerking Plaats de beschermkap
niet terug voordat u de
camera hebt ingesteld.
Plafond
Montageplaat
Camera
huis
Bevestigings-
schroeven
Beschermkap
3 De camera instellen
De HD3U/X-camera instellen:
1. Sluit voeding van 12 VDC of 24 VAC aan op de camera en controleer het
videosignaal.
2. Draai de schroeven van de ophanging los.
3. Stel de camera-ophanging in op het gewenste gezichtsveld.
4. Draai de schroeven van de ophanging weer vast.
Opmerking Richt de camera zoals getoond in "De lensfocus instellen",
zodat de juiste beeldhoek wordt verkregen.
De lensfocus instellen
De lenzen zijn in de fabriek scherpgesteld. In het onwaarschijnlijke geval dat het
optische effect van de beschermkap een lichte onscherpte van de lens veroorzaakt,
houdt u de kap boven de lens om deze definitief in te stellen.
Aansluiten van de bedrading
Functie Kleur
aansluiting
Opmerkingen
Video-uitgang Geel 1,0 Vp-p
Stroomtoevoer Groen 24 VAC (20 V ~ 28 V) of 12 VDC (10 V ~ 15 V),
Max 3,8 W, 310 mA
De aansluitingen zijn niet polariteitgevoelig.
Gebruik een voeding van 24 VAC ~ of 12 VDC .
Stroomtoevoer
Video-uitgang
Legenda:
1. De verticale hoek aanpassen
2. De horizontale hoek
aanpassen.
3. De horizontale positie
aanpassen.
4. Focussen (ver of dichtbij)
5. Zoomen (tele of breed)
Beschermkap
Camerabasis
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HD3U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HD3U in the language / languages: Dutch as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info