Manual Honeywell HCM-2000 (page 7 of 11) (English)

613716

Zoom out

Zoom in

1/11

CLEANING CONTINUED

• Fill the Reservoir Base with one 8-oz. (250ml) cup of undiluted white vinegar. Let

solution stay for 20 minutes.

• With vinegar still in the unit, clean all interior surfaces of the base with a soft

brush or cloth to remove scale.

• Rinse Reservoir Base thoroughly with clean, warm water to remove scale and

cleaning solution.

STEP TWO: WEEKLY DISINFECTING (WATER TANK,

RESERVOIR BASE)

• Empty the water tank. Refill with 1 teaspoon of chlorine bleach in 1 gallon (4 litres)

water. Let solution stay in the tank 20 minutes, swishing every few minutes to wet

all surfaces.

• Empty tank after 20 minutes. Rinse with water until bleach smell is gone.

• Repeat for the Reservoir Base.

AFTER DISINFECTING

• Clean all surfaces of the power unit with a dry, soft cloth. WARNING: DO NOT USE

WATER TO CLEAN THE POWER UNIT. THIS MAY DAMAGE THE HUMIDIFIER OR CAUSE

ELECTRIC SHOCK.

• If you have hard water, you may need to clean or change the filter more often. If

the filter is dirty, rinse it under cold tap water and turn the filter upside down

before repositioning in the base. Do not squeeze or wring out pad. Do not soak pad

in bleach or vinegar.

When the filter turns dark brown, replace it. For best and proven results always

use Honeywell Cool Moisture filters available from your local store or from

Honeywell.

• Reposition the Filter, Motor Housing and Water Tank.

NOTE: THE FAN MOTOR OF THIS HUMIDIFIER AND THE COOL MOISTURE FILTER ARE

DESIGNED TO FUNCTION EFFICIENTLY AS A SET.

USING ANY OTHER FILTER COULD

DAMAGE THE HUMIDIFIER’S MOTOR OR IMPAIR ITS PERFORMANCE.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCM-2000 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell HCM-2000 Manual

Product: