724045
14
Zoom out
Zoom in
Previous page
1/16
Next page
14
CARACTERÍSTICAS DE SEGURIDAD
LIMPIEZA Y ALMACENAJE
El Calefactor de Cerámica ComfortTemp™ 4 de Honeywell está equipado con varios dispositivos y características
para protección adicional:
Un interruptor anticaídas de 360° que desactiva el calefactor si es derribado en cualquier dirección.
Un sensor de seguridad de temperatura alta para evitar el sobrecalentamiento.
Este calefactor también está equipado con un fusible térmico que apagará permanentemente el calefactor si
opera a temperaturas más altas de lo normal. Si está activado, necesitará reemplazar la unidad.
Este calefactor fue fabricado utilizando plástico de alta temperatura y tiene una carcasa y asa frías al tacto.
Este calefactor está diseñado con cableado con aislante térmico para la resistencia al calor y conexiones
reforzadas para ayudar a proteger contra conexiones flojas.
Este calefactor también tiene la característica de Apagado Automático SafeGuard®. Si se selecciona, está
característica está diseñada para apagar automáticamente el calefactor después de 8 horas de uso continuo.
Los modelos de las series HCE645 tienen el Sensor de Movimiento SafeGuard® el cual apaga el calefactor si
un objeto se acerca demasiado al sensor de movimiento.
Se recomienda que limpie el Calefactor de Cerámica ComfortTemp™ 4 de Honeywell por lo menos una vez al mes y
antes de almacenar al final de la temporada.
Apague (
) y desconecte el calefactor. Deje que la unidad se enfríe durante 10 minutos.
Use un paño seco para limpiar las superficies externas del calefactor. NO USE AGUA, CERAS,
ABRILLANTADORES O NINGUNA SOLUCIÓN QUÍMICA.
Antes de guardar, limpie el Calefactor de Cerámica siguiendo los pasos antes mencionados. Enrolle el cable
alrededor de la unidad. Coloque en su caja original y almacene en un lugar fresco y seco.
Este calefactor no se desarma.
SOLUCIÓN DE PROBLEMAS
Problema Solución
Si su Calefactor de Cerámica
ComfortTemp™ 4 de Honeywell se
apaga inesperadamente o no funciona,
una de las características de seguridad
del calefactor pudo haberse activado
para evitar un sobrecalentamiento.
Asegúrese que esté conectado y que el tomacorriente esté funcionando.
Verifique si hay obstrucciones. Si encuentra alguna, APAGUE (
) el
calefactor y desconéctelo.
Permita que el calefactor se enfríe completamente, luego quite la
obstrucción. Espere por lo menos 10 minutos, luego vuelva a conectar el
calefactor y siga las instrucciones de OPERACIÓN.
ESPECIFICACIONES DEL PRODUCTO
Modelo(s) Dimesión de la Unidad Amperes Voltaje de la Unidad Watts Max BTUs Max
Series HCE640 20 cm L x 20 cm A x 59.4 cm A 12.5 120V~, 60Hz 1500 5118
Series HCE643 20 cm L x 20 cm A x 59.4 cm A 12.5 120V~, 60Hz 1500 5118
Series HCE645 20 cm L x 20 cm A x 59.4 cm A 12.5 120V~, 60Hz 1500 5118
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HCE640 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCE640 series in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info