Manual Honeywell CZ-2104E (page 2 of 28) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

460231

Zoom out

Zoom in

1/28

IMPORTANT SAFETY

INSTRUCTIONS

1. Read all instructions before using heater.

2. Only connect the appliance to single phase AC sup-

ply of the voltage specified on the rating plate.

3. This appliance complies with EMC directive

89/336/EEC regarding radio and T.V. interference.

4. Keep combustible materials such as furniture, cush-

ions, bedding, papers, clothes and curtains at least

90 cm (3 feet) from the heater.

5. Extreme caution is necessary when any heater is

used by or near children.

6. Always unplug the heater when not in use. Do not

pull at the flex when disconnecting it.

7. Do not cover! If covered, there is a risk of over-

heating.

8. Do not use this heater in the immediate surroundings

of a bath, a shower or a swimming pool.

9. This heater must not be located immediately below

an electrical socket.

10. If the supply flex of this appliance is damaged it must

only be replaced by a repair shop appointed by the

manufacturer because special purpose tools are

required.

11. Keep this heater clean. DO NOT allow objects to

enter any ventilation or exhaust opening as this may

cause electric shock, or fire or damage to the heater.

OPERATION

TO OPERATE THE HEATER:

• Place the heater on a firm, level and open surface

free from obstructions. DO NOT use on an unstable

surface such as bedding or deep carpeting.

• With the Power knob in the OFF ( ) position, plug

in the heater.

• Turn the Thermostat control clockwise all the way to

the HIGH ( ) setting.

• To operate the heater, push in

the Power knob while turning it

clockwise to the desired position

(Figure 1). The power light will

illuminate. Using this feature will

help ensure that the heater can not be turned on

accidentally.

• When the room reaches a comfortable temperature,

slowly turn the Thermostat control anticlockwise until

the heater goes off. This is the point at which the

Thermostat setting equals the room temperature. At

this setting, the Thermostat will automatically turn

the heater on and off to maintain this selected

temperature.

• Push in and turn the Power knob to OFF ( ) and

unplug the heater when you are finished using it.

FAN OPERATION

• Turn the Power knob to FAN ( ) and turn the

Thermostat knob to its highest setting to use the unit

as an air circulator without heat.

NOTE: PROLONGED USE OF THE FAN DURING

THE SUMMER SEASON IS NOT ADVISABLE.

SAFETY FEATURES

• This heater has a caution light which indicates that

parts of the heater are excessively hot. DO NOT

operate the heater while the caution light is on, if the

caution light goes on, turn the heater off immediately

and make sure that no objects are on or touching the

heater. If you find an obstruction, remove it and wait

at least 10 minutes for the heater to cool before try-

ing to restart it. If the caution light is still on, see war-

ranty for instructions.

TIP-OVER SWITCH

• The heater is equipped with an automatic tip-over

switch that will disable the heater if it is accidentally

tipped over.

IF YOUR HEATER FAILS TO OPERATE:

• Check for and remove any obstructions, or if the

heater has been tipped over, set it upright. Be sure it

is plugged in and that the electrical socket is work-

ing.

• Make sure that the Thermostat is not set too low.

With the Power knob set to a heat setting, turn the

Thermostat up (clockwise) until the heater restarts.

• If the heater still won’t start see warranty for

instructions.

CLEANING

We recommend that the heater be cleaned at least once

a month.

• Turn the heater OFF ( ) and unplug it. Allow it to

cool.

• Use a dry cloth to just clean ONLY the external

surfaces of the heater. DO NOT USE WATER.

ENGLISH

Fig. 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CZ-2104E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell CZ-2104E Manual

Product: