32351
5
Zoom out
Zoom in
Previous page
1/8
Next page
69-1085
5
CT2700 AN ELECTRONIC ROUND
PROGRAMMABLE THERMOSTAT
Press the thermostat straight on to the wallplate to
latch.
NOTE: To remove the thermostat from the wallplate,
grasp the thermostat on both sides and pull the
thermostat straight out.
Restore power to the heating/cooling system.
7 PROGRAM YOUR THERMOSTAT
The thermostat is preprogrammed for your convenience
with the following time and temperature settings,
see Table 2.
Table 2. Preprogrammed Time/Temperature Settings.
Period
Start
Time
Heating
Setpoint
Cooling
Setpoint
WAKE 6:00 AM 70°F (21°C) 78°F (25.5°C)
SLEEP 10:00 PM 62°F (16.5°C) 82°F (28°C)
WAKE is the time period you want the house at a comfort-
able temperature during the day.
SLEEP is the time period you can set for an energy-
savings temperature while you are sleeping.
NOTE: The heating and cooling program times are the
same. Changing your cooling WAKE time also
changes your heating WAKE time.
The following sequence uses the heating program as an
example; the System switch is in the HEAT position. To
change to the cooling program, move the System switch to
the COOL position and enter the cooling temperature
settings.
NOTE: To exit the sequence at any time, press
until End is displayed.
1. Set Current Time
a. Press .
b. Press or
to set current
time.
If you wish to change the preprogrammed time/ tempera-
ture settings, follow steps 2 through 6. If not, press the
key until End is displayed or the thermostat will
automatically return to normal operational mode within five
minutes.
2. Set WAKE Time
a. Press .
b. Press or
to set desired
WAKE time.
PM
AM
3. Set WAKE
Temperature
a. Press .
b. Press or
to set desired
WAKE temperature.
4. Set SLEEP Time
a. Press .
b. Press or
to set desired
SLEEP time.
5. Set SLEEP
Temperature
a. Press .
b. Press or
to set desired
SLEEP temperature.
6. Run Program
Press . End is
displayed for five
seconds indicating the
end of programming.
The thermostat then
displays the current
time and room
temperature.
8 OPERATE YOUR THERMOSTAT
Display Temperature Setting
a. Press or once
to display present
temperature setting.
After approximately
five seconds, the
thermostat displays the current time and room
temperature.
Temporary Change
a. Press or until
the desired tempera-
ture is displayed.
b. TEMPORARY is
displayed.
The TEMPORARY
change is in effect
until the next program
period.
NOTE: To cancel your TEMPORARY change, press
until End is displayed.
AM
SET
PM
PM
SET
PM
TEMPORARY
AM
SET
AM
SET
AM
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell CT2700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CT2700 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info