32323
9
Zoom out
Zoom in
Previous page
1/12
Next page
9 69-0333S5
Rectificación del termostato
IMPORTANTE:
La mayoría de los sistemas de
agua caliente requiere una designación
equivalente a 1.3 veces la capacidad de
corriente de la válvula.
Fig. 6Designación Del Anticipador De
Calor.
SISTEMA DE AJUSTE A TIEMPO
NOTA: No es aplicable al modelo CT1503 de
milivaoltaje.
Si el ciclaje del sistema de calefacción del
termostato parece demasiado rápido o
demasiado lento, ajústelo a tiempo (es decir,
ajuste la duración del intervalo de
funcionamiento) moviendo la palanca de
designación del anticipador, una marca del
indicador a la vez (Fig. 6); una designación más
alta aumentará esa duración de funcionamiento
del sistema de calefacción; una designación más
baja, la disminuirá. Vigile e funcionamiento del
sistema de calefacción después de cada ajuste.
El anticipador de calor debe designarse
correctamente. Una designación incorrecta
puede dar como resultado una temperatura
ambiental oscilante o que se queme el
anticipador, lo que invalidaría la garantía del
termostato.
PALANCA DE
DESIGNACIÓN
DEL ANTICIPADOR
PLACA
GRADUADA DEL
ANTICIPADOR
MS9616
AJUSTE DEL TERMÓMETRO
El termómetro se ha calibrado con precisión en
la fábrica y sólo requerirá ajuste si se ha caído o
ha sido maltratado.
Si la palanca para señalar la designación y la
lectura del termómetro no coinciden, siga el
procedimiento a continuación:
Quite la cubierta del termostato y abra la
cubierta rebotadora.
Coloque la cubierta del termostato, sobre una
mesa, cerca de un termómetro de conocida
precisión.
Permita que transcurran cuando menos cinco
minutos para que el termómetro de la cubierta
perciba la temperatura del área; después compare
las lecturas. Tenga cuidado de no tocar el
termómetro o de respirar sobre él.
Si las lecturas son iguales, coloque de nuevo
la cubierta y ponga el sistema a funcionar.
Si las lecturas son distintas, inserte un
desarmador pequeño en la ranura del
termómetro, como se muestra en la Figura 7, y
hágalo girar hasta que los dos termómetros
proporcionen la misma lectura.
Coloque de nuevo la cubierta del termómetro y
ponga el sistema a funcionar.
Fig. 7Ajuste Del Termómetro.
INSERTE
Y GIRE EL
DESARMADOR
LADO TRASERO DE LA
CUBIERTA REBOTADORA
RANURA DEL
TERMÓMETRO
MS1810
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell CT1503 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CT1503 in the language / languages: Spanish as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell CT1503

Honeywell CT1503 User Manual - English - 28 pages

Honeywell CT1503 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info