471574

Honeywell CM927 Manual

14
Zoom out
Zoom in
Previous page
1/18
Next page
14
Symptom Possible Cause Remedy
The thermostat has a blank LCD
screen.
Batteries not installed.
Check to see if there are batteries in the battery
compartment and the paper tab has been removed.
Incorrect battery orientation. Check that the batteries have been installed in the
correctorientation.
Exhausted batteries. Replace with new batteries.
The thermostat shows a flashing
symbol on the LCD screen.
Batteries are exhausted and
need replacing.
Replace with new batteries.
The thermostat’s LCD display
shows a
symbol but the
heating does not switch on.
The heating is not required
at this moment.
The heat demand is send to the BDR91 as a value
between 0-100%. The BDR91 will adjust the boiler
on time to meet this requirement. That is why the
heating will be off sometimes even if the
symbol is
displayed. To check if RF system is communicating
properly press the
button to increase the set
temperature a few degrees above the current
temperature. The heating should come on after a few
seconds.
The thermostat shows a flashing
symbol on the LCD
screen.
Fault in thermostat Remove and re-insert the batteries in the thermostat.
If the
symbol does not clear itself in a few
minutes call the installer.
Troubleshooting Guide
FAQ’s & TROUBLESHOOTING
… 14 …


Need help? Post your question in this forum.

Forumrules
1

Forum

honeywell-cm927

Reset search

  • the display remains empty (shut off) although I changed the batteries. Submitted on 4-7-2022 at 12:58

    Reply Report abuse

    • Your screen probably died same happend to mine recently Answered on 30-8-2022 at 21:23

      Vote up Report abuse

    • Does that mean, I have to get a new one Honeywell CM927? Answered on 8-9-2022 at 12:55

      Vote up Report abuse

  • Hallo das Display bleibt aus trotz sachgerechtem Austausch von Batterien. Was kann ich tun? Submitted on 4-7-2022 at 12:57

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell CM927 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CM927 in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell CM927

Honeywell CM927 User Manual - German - 18 pages

Honeywell CM927 User Manual - Dutch - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info