471571
19
Zoom out
Zoom in
Previous page
1/20
Next page
17
Problemlösung
Symptom
Der Thermostat zeigt einen
leeren LCD-Bildschirm.
Der Thermostat zeigt ein
blinkendes auf dem
LCD-Bildschirm.
Der LCD-Bildschirm des
Thermostats funktioniert, aber
die Heizung springt nicht an.
Die Heizung schaltet zu langsam
oder zu schnell EIN oder AUS.
Die Temperatur wechselt
zwischen zu warm und zu kalt.
Der Thermostat zeigt ein
blinkendes auf dem
LCD-Bildschirm.
Mögliche Ursache
Die Batterien sind nicht
eingelegt
Die Batterien sind falsch
eingelegt
Die Batterien sind verbraucht
Die Batterien sind verbraucht und
müssen ausgetauscht werden
Keine Stromversorgung des
Heizsystems
Das Programm fordert keine-
Wärme an.
Der Thermostat ist nicht richtig
an den Kessel angeschlossen
Der Thermostat ist nicht richtig
für Ihr System eingestellt
Der Thermostat ist nicht richtig
für Ihr System eingestellt
Der Thermostat ist fehlerhaft.
Lösung
Überprüfen Sie, ob Batterien in das Batteriefach
eingelegt sind.
Überprüfen Sie, ob die Batterien mit der richtigen
Polung eingelegt wurden.
Ersetzen Sie die alten Batterien mit neuen Batterien.
Ersetzen Sie die alten Batterien mit neuen Batterien.
Überprüfen Sie, ob das Heizsystem mit Strom ver-
sorgt wird.
Bewegen Sie den Schiebeschalter nach MAN und
drücken Sie ihn, um die Temperatur einige Grad über
die gegenwärtige Raumtemperatur anzuheben. Die
Heizung sollte nach einigen Sekunden wieder arbeiten.
Kontaktieren Sie Ihren Installateur, um die elektrische
Verbindung zwischen dem Thermostat und dem
Kessel zu überprüfen.
Kontaktieren Sie Ihren Installateur
Kontaktieren Sie Ihren Installateur
Entfernen Sie die Batterien aus dem Thermostat und legen
Sie diese erneut ein. Falls das nicht innerhalb weni-
ger Minuten erlischt, kontaktieren Sie Ihren Installateur.
19


Need help? Post your question in this forum.

Forumrules
1

Forum

honeywell-cm907

Reset search

  • is is possible to turn off the daylight saving setting in the CM907 Thermostat? Submitted on 31-10-2021 at 23:45

    Reply Report abuse
  • can I neutralise the auto daylight setting from this thermostat Submitted on 31-10-2021 at 23:38

    Reply Report abuse
  • can i neutralise the auto daylight setting from this thermostat
    Submitted on 31-10-2021 at 23:37

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell CM907 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CM907 in the language / languages: German as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell CM907

Honeywell CM907 User Manual - English - 18 pages

Honeywell CM907 User Manual - Dutch - 37 pages

Honeywell CM907 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info