471573
10
Zoom out
Zoom in
Previous page
1/16
Next page
10
‘Efficient Daily Use’ PROGRAMMING THE CM727
Modifying the Heating Program
To change the heating program:
a.
Press either of the PROGRAM or buttons to
entertheprogrammingmode.Thetime/temperature
settings for period
1
on Monday (Day 1) will be
ashingasshown.Theactiveperiodishighlightedby
aashingsquarearoundthenumbersatthebottomof
thescreenandtheselecteddayisshownwiththeday
indicator.
b.
Toadjusttheperiodstarttimeusethe or buttons,the‘OK?’indicatorwillbedisplayedto
conrmthechange.Holdingthebuttondownwillchangethetimequickly.
Note: If you are pressing the or buttons and the display flashes the next period, it
means the next period will be pushed forward.
c.
Oncetherequiredtimeisreachedpressthegreen buttontoconrm.
Note: If the original time setting did not require adjustment press the green button to move
to step ‘d’.
d.
Thetemperaturesettingforperiod
1
onMonday(Day1)willnowbe ashing.Toadjustthis
pressthe or buttonsandconrmthesettingagainbypressingthegreen button.
e. Thenexttimeandtemperatureperiodwillnowbeactive.Adjustthisbyrepeatingstepsb-d
aboveuntilall4periodsaresetforMondayorpresstheAUTO buttontoruntheprogramas
set,atanytime.
You now have a choice of how to set the program for the next day:
1 2 3 4 5 6 7
4321
The Built-in Heating Program
Thebuilt-inheatingprogramhas4temperaturelevelchangesperdaythatcanbesetbetween
3.00amand2.50amthefollowingday-allowingyoutomaintainthe eveningtemperature after
midnight. Each temperature level can be set between 5°C and 35°C, and adjusted in 0.5°C
increments.Thefactorydefaultprogramforheatingisasfollows.
Reviewing the Heating Program
TorevieworedittheheatingprogramusethePROGRAM or buttonstonavigatebetweenthe
4individualprogrammingperiodsforthatday.UsetheDATE/DAY buttontostepthrougheachdayof
theweek,sothecomplete7dayheatingprogramcanbereviewedoredited.
Period 1 2 3 4
Time 6:30 8:00 18:00 22:30
Temperature 21°C 18°C 21°C 16°C
Monday to Friday
(Day 1 to 5)
Period 1 2 3 4
Time 8:00 10:00 18:00 23:00
Temperature 21°C 21°C 21°C 16°C
Saturday & Sunday
(Day 6 & 7)
10


Need help? Post your question in this forum.

Forumrules
1

Forum

honeywell-cm727

Reset search

  • My heating is not coming on when I set it to the manual button Submitted on 26-5-2023 at 15:50

    Reply Report abuse
    • It may be because the room temperature is already at temp. Try turning the temp up and see if it fires. Answered on 27-5-2023 at 08:53

      Vote up Report abuse
  • When I set my thermostat to manual the heating doesn’t come on, where am I going wrong. Thank you Submitted on 26-5-2023 at 15:49

    Reply Report abuse
  • We’re going away for 4 weeks soon , I’ve set the Thermos on Auto to come on twice a day for an hour to prevent any freezing in the pipes- will the thermos still come on automatically between the set times if the temp drops below a certain level? In other words, will our heating be on full time when we’re away during a cold snap? Obviously this is going to incur high charges for us .Any advice appreciated Submitted on 12-12-2022 at 06:43

    Reply Report abuse
  • Hi I have a CM721 and CM727 Honeywell Thermostat.
    I cannot manage to keep the temperature to remain constant, IE At night I sometimes need 23 C to stay warm during the night ( otherwise I get cramp! )
    Which button/s do I press and in which sequence please ?
    Many Thanks,

    Alan
    Submitted on 15-11-2021 at 12:31

    Reply Report abuse
    • You’d have to leave the thermostat on manual and adjust the temperature with the up and down arrow buttons to the right hand side of the screen Answered on 15-11-2021 at 12:33

      Vote up Report abuse
  • Why does the heating come on outside of the times I have set it to come on, when in auto mode? Submitted on 3-11-2021 at 08:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell CM727 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CM727 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell CM727

Honeywell CM727 Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info