477382
5
Zoom out
Zoom in
Previous page
1/7
Next page
CM67 CHRONOTHERM
EN0R 8498 R2 11/985
Parameter Installer Set-
Up Number /
Abbreviation
(Press + or -
key to
change)
Factory Setting Optional Setting Installer Set-
Up Category
(Press keys
PROG 1 or 2
to select)
12
Display Description Display/Setting Description
Optimisation 1:0P 0 Optimisation disabled 1 Optimisation enabled 1
MinimumONTime 2:0t 1 1minuteminimumONtime 2to5 2-2minutes
3 - 3 minutes
4 - 4 minutes
5 - 5 minutes
1
AM-PM / 24hr Display 3:Cl 0 24 hr clock display 1 12hrAM/PMclockdisplay 1
Accessory Module Type 4:At 0 No accessory module
plugged in
1, 2 1 - Auto Time Setting Module
2 - Weatherstation Module
1
RESET Time /
Temperature Program
5:rP 1 Time / Temperature profile set
to factory default
Changes to 0 when one of the
time/temp profiles are changed
0
1
Time / Temperature are as
programmed
To restore the factory profile
set to 1
1
You must now press the PROG 2 key to enter the next section
Heat / Cool Operation 6:HC 1 Heating Operation 0 Cooling Operation 2
Electric Heat 7:Eh 0 Applications < 3A 1 Applications 3 - 8A 2
Pump Exercise 8:PE 0 Pump Exercise Disabled 1 Pump Exercise Enabled 2
Cycle Rate 9:Cr 6 6 cycles per hour (cph) for gas
boilers, zone valves and fan-
coil
3, 9, 12 3 - 3 cph
9 - 9cph
12 - 12 cph
2
Second Temperature
Sensor
10:SS 0 No sensor fitted 1, 2 1 - Outside Temperature
Sensor fitted
2 - Remote Temp. Sensor
fitted
2
Upper Temperature Limit 11:UL 30 30°C Upper Temp. Limit 21 to 29 21°C to 29°C adjustment in
C steps
2
Lower Temperature Limit 12:LL 5 C Lower Temp. Limit 6 to 16 6°C to 16°C adjustment in
C steps
2
Temperature Offset 13:tO 0 No offset -3 to +3 -3°C to +3°C adjustment in
0.1°C steps
2
Pressure Offset
(needed for
Weatherstation accessory
only)
14:PO 0 No offset -99 to +3 -99 mbar to +99 mbar
adjustment in 1 mbar steps
2
Proportional Band Width 15:Pb 1.5 1.5°C Proportional Band 1.6 to 3.0 1.6°C to 3.0°C adjustment in
0.1°C steps
2
Return all Set-Up
Features to Factory
Settings
16:FS 1 All settings held are the factory
defaults. Changes to 0 when
one of the parameter values
are changed
0
1
Settings are as modified
above
To restore the factory profile
set to 1
2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell CM67 CHRONOTHERM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CM67 CHRONOTHERM in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell CM67 CHRONOTHERM

Honeywell CM67 CHRONOTHERM User Manual - German - 2 pages

Honeywell CM67 CHRONOTHERM Specifications - Dutch - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info