579891
5
Zoom out
Zoom in
Previous page
1/16
Next page
5
1. PROGRAMMING YOUR THERMOSTAT
You can program your Chronotherm IV either mounted on the wall plate or holding it in
your hand. The first step to make your thermostat ready for use is to program the right day
of the week, the time and the selection of Summer- or Wintertime. After this, you can
either make the device run according to the pre-programmed factory settings or you can
program your own settings. Before programming your own settings, you have to decide
whether you want to use 4 or six different periods per day. To make it easier on yourself,
it helps to write down your settings before programming.
BEWARE: only press the buttons with the tip of your finger. Sharp objects such as a
pencil may damage the buttons!
Programming the right day, time and Summer- or Wintertime
1. Press “Invoer dag/tijd”.
In the display the indications TIME, ZO or WI appear, MA and the time.
2. Press button “Day” so often till you see in the bottom of the display the abbreviation
for the right day.
3. Press buttons “Up” and “Down” (right of the display) to select the right hour.
Press buttons “Vooruit” and “Terug” to select the right minutes for the time.
Press “I” (right of the display) to set the seconds on “00”.
Selecting Summer- or Wintertime
In the left top corner of the display Summer- or Wintertime is indicated.
Press, if necessary, “Zomertijd/Wintertijd” to select the right season.
Acknowledging the new settings
Press “Start Programma” once. Settings for day and time are now activated. In the
display, time, day, room temperature and current period are being shown.
Until your personal program has been entered, the Chronotherm IV works according to
the factory settings. Now you can also program your personal settings.
The factory settings
These are the factory settings of the Chronotherm IV:
Period: Monday to Friday Saturday and Sunday
RISING 7:00 hrs 19° C 8:00 hrs 19° C
SLEEP 22:30 hrs 15° C 23:00 hrs 15° C
Before you start entering your personal settings, first you have to determine whether you
wish to use four periods per day or six. The Chronotherm IV uses four periods in the
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell Chronotherm IV- type T8602A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell Chronotherm IV- type T8602A in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell Chronotherm IV- type T8602A

Honeywell Chronotherm IV- type T8602A User Manual - Dutch - 54 pages

Honeywell Chronotherm IV- type T8602A User Manual - Dutch - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info