6417

Honeywell chronotherm 4 T8602A Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
69-0309—9 8
T8602A,B,C,D AND TS8602A,C Chronotherm
®
III FUEL SAVER THERMOSTATS
M2919
RETURN
MON
HEAT ON
RETURN
MON
HEAT ON
RUN
PROGRAM
TIME
TEMPERATURE
PRESENT
SETTING
SKIP
NEXT
PERIOD
CHANGE
TO LAST
PERIOD
SET
PRESENT
DAY/TIME
HOLD
TEMP
DAY
SET
HEAT/COOL
SLEEP
LEAVE
AHEAD
WARMER
RETURN
BACK
COOLER
WAKE
A.
B.
C.
PM
PM
Fig. 18. Mounting thermostat on wallplate.
CHECKOUT
NOTE: On models without system or fan switch,
disregard instructions about moving the switch.
Heating
Move the system switch to HEAT and the fan switch to
AUTO. Press WARMER key until the setting is about 10°F
(6°C) above room temperature. Heating should start and
the fan should run (may be a short delay on forced air
systems). Press COOLER key until the setting is about
10°F (6°C) below room temperature. The heating equip-
ment should shut off.
Cooling
CAUTION
Do not operate cooling if outdoor temperature is
below 50°F (10°C). Refer to manufacturer recom-
mendations.
NOTE: When cooling setting is changed, thermostat will
wait up to five minutes before turning on the air
conditioner. This delay protects the compressor.
Move the system switch to COOL and the fan switch to
AUTO. Press COOLER key until the setting is about 10°F
(6°C) below room temperature. The cooling equipment
and fan should start. Press the WARMER key until the
setting is about 10°F (6°C) above room temperature. The
cooling equipment and fan should stop.
NOTE: On an AUTO changeover thermostat (T8602D),
the heating temperature must be set at least 3°F
(2°C) below the cooling temperature, or the
display will flash.
Fan
Move the system switch to OFF, and the fan switch to ON.
The fan should run continuously. When the fan switch is in
the AUTO position, the fan cycles with the heating or
cooling system.
Installer Self-Test (Optional)
Perform the following test as a check of all thermostat
functions. If thermostat does not respond as indicated,
replace the thermostat.
ᕡ Press AHEAD and BACK keys at the same time.
While holding down the keys, all segments of the
display should be on. See Fig. 19.
ᕢ Set system switch to OFF, where applicable. Press
AHEAD and BACK and PRESENT SETTING keys
at the same time to enter self-test.
ᕣ Press each key as listed below, and look for
responses listed as key is held down and released.
Fig. 19. All segments on display.
SUN MON TUE WED THU FRI SAT COOL ON HEAT ON
WAKE LEAVE RETURN SLEEP TEMPORARY
REPL
BAT
AM
PM
SET
PT
M410C
M410C
… 8 …


Need help? Post your question in this forum.

Forumrules
1

Forum

honeywell-chronotherm-4-t8602a

Reset search

  • Hi,
    I will not be in my house for a week and would like the heating system not to work. Right now it is in Auto, but I do not want the heating to work at all. Can you please advise Submitted on 8-11-2022 at 14:00

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell chronotherm 4 T8602A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell chronotherm 4 T8602A in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell chronotherm 4 T8602A

Honeywell chronotherm 4 T8602A User Manual - English - 16 pages

Honeywell chronotherm 4 T8602A User Manual - Dutch - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info