Manual Honeywell B H-862E (page 4 of 34) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

460322

Zoom out

Zoom in

1/34

6 7

EXPLANATION OF OPERATION PANEL

1. ELECTRONIC HUMIDISTAT

for continuous adjustment of the desired humidity. The

optimum value between 40% and 60% is easy to adjust. You

press the button

and

together and after some seconds

on the LCD display the current value of humidity starts to flash.

Now it is possible to adjust with the button

or with the

button

the value of humidity you want. After a few seconds

your chosen humidity value disappears and the display switches

over to the current humidity value of your room.

2. WATER LEVEL INDICATOR

If the red indicator lamp

is lit, this normally means that

water has to be refilled in the tank or that there is too much

water in the atomizing chamber and this must be skimmed off.

Should the indicator lamp stay on continuously despite a

correct water level, there is a malfunction. In this case, the

unit must be brought to the nearest service point.

3. NIGHT REDUCTION

The humidifier is equipped with an additional switch for

night operation. This lowers the noise level by reducing the

fan speed and also reduces the amount of humidity. This is

possible when you press the button

. On the LCD display

will appear a little moon. When you press a second time the

button

, the night reduction is switched off and the little

moon on the display disappears.

4. CONTINUOUS

When you press the button

, it is possible to switch the

unit over to a continuous run. That means that the unit will

operate without the humidistat control until the tank is

empty. On the LCD display will appear a circle. When you

press again the button

, the unit will switch over to the

automatic humidistat control mode and on the LCD display

the circle will disappear.

5 DESIRED HUMIDITY

When a comfortable humidity level is reached, lower the

humidity level (Humidistat) setting slowly until the electronic

for fog production shuts off. The desired humidity sign

on the display will appear, indicating that the humidity

setting has been reached. The electronic humidistat will

automatically restart the electronic for fog production each

time the humidity level falls below this setting. This “ON/OFF”

cycle will continue periodically while the humidifier is in use.

OPERATION

1. Place the unit on a level, dry surface that is insensitive to

water. Ensure that the air-filter vents

have enough room

for suction. The atomizer nozzle

must be unimpeded

in blowing off and must not be directed against objects or

surfaces in the immediate vicintity.

2. Remove the tank lid

and fill the water tank

with cold,

fresh tap water.

3. IMPORTANT: Please do not overfill the tank you can

damage the unit. Please fill tank only to the “max.” sign

shown on the scale. In case that the scale is missing in the

tank, the water level must be at least 1 cm under the edge

of the tank.

4. Before mounting the enclosed decalcifying filter

on the

tank filter neck, remove the packing sheeting. Attach the

decalcifying filter on the tank filter neck, align it along the

guide rail inside the tank and press it down to the stop. When

the filter is now under the water, please press the knob of the

integrated valve of the filter down to allow the air bubbles

to escape. Please do this procedure everytime you replace

the filter. We recommend to press the knob of the integrated

valve also once in a week for better function of the filter.

5. Replace the tank lid

on the water tank

6. Mount the atomizer nozzle

and turn it in the desired

direction.

7. Connect the unit to the power supply system with the plug.

8. Set the humidity control to your favorite value for continuous

adjustment of the desired humidity. The optimum value

between 40% and 60% is easy to adjust. You press the button

and

together and after some seconds on the LCD

display the current value of humidity starts to flash. Now it

is possible to adjust with the button or with the button the

value of humidity you want. After a few seconds your chosen

humidity value disappears and the display switches over

to the current humidity value of your room. This setting is

automatically maintained by your humidifier, which means: if

the air is too dry the humidifier will sense and automatically

cycle on. When the desired humidity is attained, the unit

switches off automatically.

9. If the water tank

is empty, the unit switches to a standby

position. This is indicated by the red signal light

“Add

water”. In this case, add water.

10. If you have a unit with night lowering, you can set this mode

of operation with the button

. The humidity discharged as

well as the noise produced are thereby lowered.

11. During the first hours of operation, the mist emitted may

have a peculiar smell. This will disappear after a while and is

caused by the granulate of the decalcifying filter that is fresh

from production.

ENGLISH

SAFETY NOTES

1. The unit must only be used to humidify the room air.

Inappropriate use can lead to hazards and damages for which

no liability is assumed.

2. Should the unit or the power cable have suffered damages

during transport (e.g. through violent impact), please do not

put it into operation under any circumstances. It must be

checked by an authorized service outlet.

3. This appliance is not intended for use by persons (including

children) with reduced physical, sensory, or mental

capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning the

use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play

with the appliance.

4. If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in

order to avoid a hazard.

5. Never operate the unit or pull the plug with wet hands.

6. The unit must only be placed on a level, dry surface that is

insensitive to water.

7. Compare the data on the rating plate with those of your

power supply- they must be identical.

8. Always fill the unit with fresh, cool tap water only.

9. Never operate the unit without water.

10. Do not add aromas or additives to the water.

11. Never operate the unit without the decalcifying filter or when

the filter is used up. Exchange the decalcifying filter after 5

months at the latest.

12. Before cleaning, always pull the power plug.

13. During cleaning, take care that no water enters inside the

unit. When you empty the unit of the restwater, please take

care that the water does not run into the hole of the airflow

which is on top of the atomizing chamber

. If water goes

into this hole, the entire unit can be damaged. Please empty

the water on the opposite side of the airflow hole of the

atomizing chamber. Never dip the unit in water or put it in the

dishwashing machine.

14. If the machine has been put out of operation for a longer

period of time, rinse the water tank and the atomizing

chamber well before filling.

15. If the unit shows defects in functioning, please do not put it

into operation any more. It must be checked by an authorized

service outlet.

16. Repairs must only be made by authorized service outlets.

COMPONENTS

AirfilterAir filter

Airfilter flapAir filter flap

AtomizernozzleAtomizer nozzle

TanklidTank lid

WatertankWater tank

Decalcifying filter

ON/OFFswitchON/OFF switch

ContinuousoperationContinuous operation

LCDdisplayLCD display

Indicatorlamp “refill water”Indicator lamp “refill water”

Buttonminus (for less humidity)Button minus (for less humidity)

Buttonplus (for more humidity)Button plus (for more humidity)

Low-workingnight operationLow-working night operation

Lidof atomizing chamberLid of atomizing chamber

AtomizingchamberAtomizing chamber

FIRST USE

Before using the unit for the first time, you should note the

following points:

1. Remove all packing material from the unit (also the sheeting

from the decalcifying filter).

2. Please check your water hardness with the enclosed test strips

as described on Page 8 of the operating instructions.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell B H-862E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell B H-862E Manual

Product: