723808
7
Zoom out
Zoom in
Previous page
1/36
Next page
This air purifier features a remote control handset for additional convenience. The
remote control allows you to turn the air cleaner OFF and to change the running speed
(LOW, MED, HIGH). NOTE: When a program function is running (pre-set or customized
program cycles), you may override the speed setting; the unit will continue with its
programmed function once it reaches the next programmed time.
The model 17005 series air purifier is equipped with Intelli-Check
Filter Monitors to serve
as a convenient reminder for when to clean the LifeTime HEPA
Filter and when to replace
the carbon pre-filter based on the air cleaner’s hours of use and operating speed. This is
beneficial because a filter’s life depends on the amount
of air and contaminants drawn through it. Each filter bar
will fill up from clean to dirty as its expected filter life is
used up. Once the bar is completely full, it is time to
check and clean/ replace the appropriate filter.
To move between the PRE-FILTER bar and the HEPA
FILTER bar, quickly press the FILTER button (Fig. 6a).
To RESET a filter bar that appears on the display,
press and hold the FILTER button for 5 seconds, or
until the filter bar clears to CLEAN status (Fig. 6b).
The Intelli-Check
Filter Monitors calculate the expected
pre-filter life based on an assumed average operating
time of 12 hours a day on medium speed. Therefore, it
will indicate replacement of the Pre-filter in about 3
months. Depending upon your individual usage
(environment, hours and speed of operation), you may
need to check and replace the pre-filters more or less
frequently.
Fig. 6a
Fig. 6b
Press the SET button until PG2 and P2-ON appear. The speed icon will appear.
(Fig. 5c).
Adjust the time using the hours and minutes button. This is the time that the machine
will turn ON for the second ON/OFF cycle.
Adjust the desired speed setting using the SPEED button.
Press the SET button until PG2 and P2-OFF appear. The speed icon will disappear.
(Fig. 5d).
Adjust the time using the hours and minutes button. This is the time that the machine
will turn OFF for the second ON/OFF cycle.
Continuously press SET button until you exit set time mode.
Press the PROGRAM button until PG2 appears. Unit will automatically operate per
your settings.
NOTE: When a program function is running (pre-set or customized program cycles), you
may override the speed setting; the unit will continue with its programmed function once
it reaches the next programmed time.
Customize Program Cycles: Model 17005 (continued)
Remote Control: Model 17005
Intelli-Check
Filter Monitors: Model 17005
7
17000-17005 OM EFS.qxd 8/19/05 3:38 PM Page 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell 17000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell 17000 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info