723808

Honeywell 17000 Manual

4
Zoom out
Zoom in
Previous page
1/36
Next page
To Reset Filter Indicator
• Once the filter has been checked and cleaned or replaced as
needed, the filter indicator will need to be reset.
• With the unit powered on, press and hold the appropriate filter
indicator button down for approximately 10 seconds until the light
turns off (Fig. 1).
The Intelli-Check
™
Filter Indicators serve as a convenient guideline for when to clean the
LifeTime HEPA
™
Permanent Filter and when to replace the carbon pre-filter. Depending
upon your individual usage (environment and hours used), you may need to clean/replace
the filters more or less frequently.
When the
HEPA Filter Indicator Light turns on, it’s time to clean your HEPA filter. The
Intelli-Check
™
reminder for when to clean the HEPA filter is intended as a guideline only as
the performance of the filter media is dependent on the concentration of the contaminants
to which the system is exposed. If there are sources of large amounts of contaminant
generation (such as dust from woodworking or heavy smoking) the HEPA filter in your air
purifier may need to be cleaned more often. For instructions on how to clean your HEPA
filter, refer to section “Cleaning the LifeTime HEPA
™
Permanent Filter” in this manual.
When your
Pre-filter Indicator Light turns on, it’
s time to replace your pre-filter. It should
be replaced at least every 3 months. If there are heavy concentrations of odors, smoke, or
large particles in the home, you may need to change the carbon pre-filter more often. For
instructions on how to replace your pre-filter, refer to section “Removing/Changing the
Filters” in this manual.
Note: We do not recommend operating the air purifier without the carbon pre-filter.
Fig 1
• CONNECT THE BATTERY. The programmable controls
and real time clock are battery backed. Upon initial set-up, pull
the protective film from the battery door so the battery will
make contact and function (Fig. 2). This battery allows you to
temporarily unplug your air cleaner without losing program
settings.
• INSTALL PRE-FILTER BEFORE USE. Locate the pre-filter in
the packaging. Refer to the "How to Install and Replace the
Filters" section for proper installation.
• SET CURRENT TIME. Plug unit in outlet.
NOTE: The air cleaner cannot be programmed unless it is plugged into the outlet.
Hold SET button down for approximately 3 seconds. The clock icon and word TIME
will appear. You may adjust the hours using the up button and adjust the minutes
using the down button. After the current time is set, repeatedly press SET button until
( ) disappears.
Fig. 2
Intelli-Check
™
Filter Indicator: Model 17000
Reset Filter Indicator/Turn Light Off: Model 17000
Set-Up: Model 17005
4
17000-17005 OM EFS.qxd 8/19/05 3:38 PM Page 4
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell 17000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell 17000 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info