551058
5
Zoom out
Zoom in
Previous page
1/9
Next page
© 2012 Honda Motor Co., Ltd. - All Rights Reserved.
5 of 9
87940-MGS-A300
7. Remove the template. Cut out the shaded areas on
the seat cowl as shown.
Repeat on the left side.
FILE
File off the cut surfaces after
removing the
area.
SEAT COWL
SEAT COWL
Remove any burrs.
FRET SAW
Remove.
8. Install the seat cowl in the reverse order of removal.
Remove.
REAR FENDER B
WOOD BLOCK
10 mm thick
Position between
the rear fender B
and frame.
Wrap the tape
around the hole
saw leaving 2 mm
of the tip exposed,
as shown, to serve
as a hole saw stop.
ELECTRIC DRILL
(20 mm HOLE SAW)
<If rear fender B has factory marked points>
9. Drill 20 mm holes at the factory marked points on the
rear fender B using an electric drill and hole saw.
Be careful not to damage harnesses.
Remove any burrs from the edge of the hole.
Repeat on the left side.
HOLE SAW
2 mm
ELECTRICAL TAPE
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda NC 700X Saddlebag Support Brackets at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda NC 700X Saddlebag Support Brackets in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info