551046
2
Zoom out
Zoom in
Previous page
1/15
Next page
© 2012 Honda Motor Co., Ltd. - All Rights Reserved.
2 of 15
87951-MGS-A300
No. Description Qty
(1) Fuse (7.5 A) 1
(2) Relay 1
(1)
(2)
RELAY SET
Sold separately
Side cutters
Scissors
Ruler
Marker
Electrical tape
Pro Honda Handgrip Cement (08712-0001)
Grease
Thread lock
Isopropyl alcohol
Shop towel
TOOLS AND SUPPLIES REQUIRED
INSTALLATION INFORMATION
CAUTION:
To prevent burns, allow the engine, exhaust system,
radiator, etc., to cool before installing the accessory.
NOTE:
The following accessories are also required to install
the heated grips.
Heated grips
Sub harness
Relay set
Disconnect the throttle cables from the right grip as
instructed in the motorcycle’s Service Manual.
For secure adhesion of the left heated grip to the
handlebar, we urge you to use the recommended
adhesive agent (Pro Honda Handgrip Cement or
equivalent) and wait until it cures fully before use.
Be sure to open and close the throttle to check for
smooth operation after installation of the right heated
grip.
Take care not to damage the painted surfaces of the
motorcycle.
Reinstall the removed parts on the motorcycle and
make sure that wires and harnesses are not pinched.
Disconnect the negative (-) cable from the battery
before installing this accessory.
The memory of the clock will be erased when
you disconnect the battery. Reset the clock after
reconnecting the battery.
Trim the excess ends off the wire ties after attaching
them to the wire harnesses. Do not allow the cut part
of the wire tie to interfere with any harness or brake
hose.
After heated grips installation, check the lights (e.g.
right / left turn signal lights and brake lights) for
proper operation.
When replacing the Sub Harness or Relay Set,
follow the instructions described in these installation
instructions.
USE AND CARE INFORMATION
Use a 5A fuse for replacement of the fuse in the
accessory harness. Do not use any other fuse for
replacement.
Use a 7.5A fuse for replacement of the fuse in the
relay set. Do not use any other fuse for replacement.
Check the accessory mounts frequently.
TORQUE INFORMATION
Refer to the Service Manual for the torque values of the
removed parts.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda NC 700X Heated Grips at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda NC 700X Heated Grips in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info