566436
5
Zoom out
Zoom in
Previous page
1/57
Next page
ENGLISH
SETTING ENGINE SPEED
STOPPING THE ENGINE
THROTTLE LEVER
THROTTLE LEVER
FFAASSTT
CHOKE LEVER
OOPPEENN
CCLLOOSSEEDD
THROTTLE LEVER
SSLLOOWW
FAST
SSLLOOWW
SSLLOOWW
5
Position the throttle lever for the desired engine speed.
Some engine applications use a remote-mounted throttle control
rather than the engine-mounted throttle lever shown here. Refer to
the instructions provided by the equipment manufacturer.
For engine speed recommendations, refer to the instructions
provided with the equipment powered by this engine.
Do not disconnect the battery from the engine while the engine is
running. Disconnecting the battery causes the fuel-cut solenoid to
shut off the flow of fuel to the carburetor main jet, and the engine
will stop.
To stop the engine in an emergency, simply turn the engine switch
to the OFF position. Under normal conditions, use the following
procedure. Refer to the instructions provided by the equipment
manufacturer.
Move the throttle lever to the SLOW position.
Some engine applications use a remote-mounted throttle
control rather than the engine-mounted throttle lever shown
here. Refer to the instructions provided with the equipment
powered by this engine for remote control information.
Turn the engine switch to the OFF position.
If the fuel tank is equipped with a valve, turn the fuel valve to the
CLOSED or OFF position.
Move the throttle lever away from the SLOW position, about 1/3
of the way toward the FAST position.
Some engine applications use a remote-mounted throttle
control rather than the engine-mounted throttle lever shown
here. Refer to the instructions provided with the equipment
powered by this engine for remote control information.
When the engine starts, release the engine switch, allowing it to
return to the ON position.
Using the electric starter for more than 5 seconds at a time will
overheat the starter motor and can damage it.
If the engine fails to start within 5 seconds, release the engine
switch, and wait at least 10 seconds before operating the starter
again.
Turn the engine switch to the START position, and hold it there
until the engine starts.
Operate the starter.
Turn the engine switch to the ON position.
If the choke lever was moved to the CLOSED position to start the
engine, gradually move it to the OPEN position as the engine
warms up.
Warm up the engine for 2 or 3 minutes.
1.
2.
3.
3.
4.
5.
6.
7.
09/07/17 20:07:04 32Z6M600_005
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda GXV690 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda GXV690 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda GXV690

Honda GXV690 User Manual - German, Dutch, Italian - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info