564217
10
Zoom out
Zoom in
Previous page
1/12
Next page
- 10 -
Parameter 13 – Temperature offset
Since the radiator controller measures the room
temperature in the area of the radiator, it is possible
that this temperature deviates from the temperature
measured at a different point in the room.
If, for example, 20 °C is measured in the room and at the
radiator 21.5 °C, this effect can be compensated by an
offset of –1.5 °C. The display at the radiator controller
remains unchanged.
Parameter 15 – Display of the valve position
When this parameter is activated (setting "1"), the
calculated valve position is displayed (0 to 100%
opened) briefly.
The main display is shown again after approx. 3 minutes
or when the AUTO button is pressed.
Changing parameters
1. Keep the PROG button pressed for at least
10 seconds until Parameter 1 flashes (left-hand digit).
The right-hand digit shows the current setting.
The parameter is displayed additionally in plain text.
For example, the display
1 1
stands for Parameter 1
(language) with Setting 1 (German).
2. If desired, use the adjustment dial to select a different
parameter (left-hand digit).
3. Press the OK button to edit the parameter.
The current setting of the parameter flashes (right
hand digit).
4. Use the adjustment dial to set the desired setting
(right-hand digit) and confirm with OK .
5. The parameter being edited flashes (left-hand digit).
6. For the further parameters repeat Steps 2 to 4.
7. Use the AUTO button to return to automatic mode.
10. Further functions
Monitoring functions
Window function
If you open a window causing the temperature to drop,
the radiator controller closes the radiator valve in order
to save energy.
window
is displayed.
When the temperature rises again, but at the latest after
the set period (factory setting: 30 minutes), the radiator
controller opens the radiator valve again.
You can also open the radiator valve beforehand by
pressing the AUTO button or turning the adjustment
dial.
The sensitivity of the radiator controller to a temperature
drop or temperature rise can be set, see Section 9,
Parameters 5 to 7.
Valve protection
If the radiator valve has not been opened completely for
2 weeks, a self test is carried out. The radiator controller
opens the radiator valve briefly on the subsequent
Monday in order to prevent seizing.
cycl
is displayed.
Frost protection
If the temperature drops below 5 °C, the radiator
controller opens the radiator valve until the temperature
rises above 6 °C again. This prevents the heating from
freezing up.
frost
is displayed.
i
The heating may not be switched off. Otherwise the
radiator controller cannot carry out the frost protec-
tion function.
Summer break
If you have switched off the central heating system
in summer and do not want to waste the batteries of
the radiator controller, you can close the radiator valve
continuously.
Closing the valve
1. Press the button AUTO/ECO/MANU until
manual
is displayed.
2. Turn the adjustment dial anti-clockwise until
off
is
displayed.
The radiator valve now remains closed. The valve and
frost protection function remains active.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Homexpert by Honeywell Rondostat Comfort plus HR30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Homexpert by Honeywell Rondostat Comfort plus HR30 in the language / languages: English as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Homexpert by Honeywell Rondostat Comfort plus HR30

Homexpert by Honeywell Rondostat Comfort plus HR30 User Manual - German - 12 pages

Homexpert by Honeywell Rondostat Comfort plus HR30 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info