564217

Homexpert by Honeywell Rondostat Comfort plus HR30 Manual

7
Zoom out
Zoom in
Previous page
1/12
Next page
- 7 -
Setting the time program
Selecting weekdays
1. Press the PROG button.
comfort 1
is displayed.
2. Turn the adjustment dial clockwise until
program
is
displayed.
3. Press the OK button and use the adjustment dial to
select the desired weekdays for your time program:
mo - fr
,
sa - su
,
mo - su
,
mo
,
tu
, ...,
su
or
day off
4. Confirm the selected weekdays with the OK button.
The temperature as well as the beginning and end of
the first switching point, e.g.:
i
• The end of a switching point is simultaneously the
beginning of the next switching point.
• Only the programmed switching points are
displayed.
Viewing switching points
You can use the adjustment dial to change from one
setting point to another and thus view the setting of all
the programmed switching points.
Editing switching points
1. In order to edit the displayed switching point press
the OK button.
The temperature display flashes.
2. Use the adjustment dial to select the desired
temperature (Comfort temperature 1, 2 or Conserve
temperature) for the selected switching point and
confirm with OK .
The beginning of the selected switching point flashes.
i
The time scale for programming of the switching
points begins at 3:00 in the morning and ends at 2:50
on the following day.
3. Use the adjustment dial to set the desired beginning
for the selected switching point and confirm
with OK.
The end of the selected switching point flashes.
4. Use the adjustment dial to set the desired end of the
selected switching point and confirm with OK .
saved
is displayed briefly. Subsequently the
temperature as well as the beginning and end of the
switching point are displayed.
5. For the further switching points also select the
temperature as well as the beginning and end of the
switching point as described in Steps 1 to 5.
i
• A switching point is not saved until the
temperature, beginning and end have been
confirmed with the OK button.
• If a switching point is not required, select the
setting --.-.
Editing further weekdays
1. When all the switching points have been edited, use
the PROG button to select the weekdays.
2. Edit the switching points for the next weekdays.
3. After all the required weekdays have been set,
terminate programming with the AUTO button.
The radiator controller operates immediately in
automatic mode with the set time program.
Deleting a switching point
fWhen a switching point is not required, select the
temperature setting
--.-
and confirm with OK .
i
The first switching point cannot be deleted.
Adding a switching point
1. Turn the adjustment dial until
add new
is displayed
and confirm with OK .
The temperature display flashes.
2. Use the adjustment dial to select the desired
temperature (Comfort temperature 1, 2 or Conserve
temperature) for the new switching point and confirm
with OK .
The beginning of the new switching point flashes.
3. Use the adjustment dial to set the desired switching
time for the new switching point and confirm
with OK .
The end of the desired switching point flashes.
4. Use the adjustment dial to set the desired end of the
new switching point and confirm with OK .
i
add new is only displayed when less than 6 switch-
ing points are programmed.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Homexpert by Honeywell Rondostat Comfort plus HR30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Homexpert by Honeywell Rondostat Comfort plus HR30 in the language / languages: English as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Homexpert by Honeywell Rondostat Comfort plus HR30

Homexpert by Honeywell Rondostat Comfort plus HR30 User Manual - German - 12 pages

Homexpert by Honeywell Rondostat Comfort plus HR30 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info