518476

Homedics WFL-RVRB-2 Manual

3
Zoom out
Zoom in
Previous page
1/29
Next page
54
GB
GB
ASSEMBLY AND INSTRUCTIONS FOR USE :
1. Unpack the product. Wipe off dust with a damp cloth.
2. Familiarize yourself with the pump. The pump speed is controlled by the dial located at the
front of the pump. The speed is indicated by a “min” and “max” (Fig 1). At its highest speed
level, the dial will cease to move any further. To decrease the pump speed, move the dial
counter-clockwise toward the “min”sign. Similarly, at its lowest speed, the dial will cease to
move any further.
3. Lead the cord through the cord slot on the bottom of the base.
This will ensure that the unit is balanced when placed on a flat surface. Attach the A/C
adaptor to the base power cord. DO NOT plug into outlet at this time (Fig. 2).
Figure 2Figure 1
TopTier
Stones
WaterSupply
Connector
Cut-Out
Stones
PVC
Tube
Pump
Watermark
Base
LED Light
Connector
Outlet
MiddleTier
Cut-Out
Platform
Adaptor
Switch
Base Power
Cord
Supporting
Poles
Base
Edge
LEDLight Cord
Figure 5
Figure 6
PUMP
Figure 3
Figure 4
Figure 7
Drip Loop
D
rawing on Base
Base Edge
Cut-Out
LEDLight Socket
TopTier
LED Light
Connector
Larger Hole
WaterSupplyConnector
Middle
Tier
Stones
Water
Watermark
4. Place the platform on the
supporting poles of the base
(Fig. 2).
5. Insert the PVC tube located under
middle tier into the pump (Fig. 2).
6. Insert the LED light cord through
the small hole located under the
middle tier (Fig. 2).
7. Align the cut-out at the bottom
edge of middle tier with the edge
of base so it sits flat on the base
(Fig. 3).
Note: Pump position should be
corresponding to the drawing on
base.
8. Insert the LED light connector into
the LED light socket on the
bottom of top tier, and then insert
the water supply connector on the
bottom of top tier into the larger
hole of middle tier (Fig. 4).
9. Add clean water into middle tier
(Approx. 300mls), and then into
base (Approx. 1l 67mls). The
water level should be even with
the watermark. Next, arrange the
stones provided on top tier,
middle tier and the platform as
desired (Fig. 5).
10.Plug the cord into 230V mains
outlet. The fountain is controlled
by the switch located on the
power cord. If pump doesn’t
operate, rotate in-line switch once
to turn “on” and once more to turn
“off”.
NOTE: Ensure that the electrical
cord loops below the electrical
outlet to form a ‘Drip Loop’ (Fig.
6). This will prevent water from
running down the cord into the
electrical outlet.
11.As this product has two flowing
directions, unplug the power
source before changing fountain
position. To do so, turn top tier
counter clockwise 90 degrees.
When water has stopped flowing
from it, switch the fountain back
on (Fig. 7).
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Homedics WFL-RVRB-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Homedics WFL-RVRB-2 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info