Manual Homedics MCS-1600H-EU (page 3 of 40) (All languages)

690100

Zoom out

Zoom in

1/40

INSTRUCTIONS FOR USE:

IMPORTANT - Preparing the appliance for use

The Shiatsu Massager comes with a screw located on the back of the unit to

protect the massage mechanism during shipment, which must be removed

before the rst use to allow the shiatsu feature to function. Use the provided

Allen key. Then, properly dispose of the screw.

WARNING Failure to remove screw may cause permanent damage to

the appliance.

Error: all remote control LEDS ash for a few seconds.

Cause: massager overloaded.

Solution: ensure the allen key bolt/screw has been removed from back of the

massage cushion (using the allen key included). Should the condition continue

after this please contact your HoMedics service centre.

Strapping System

The SensaTouch 2 in 1 Shiatsu Back and Shoulder Massager incorporates a

unique strapping system which allows you to fasten it to almost any chair. Just

slip the straps over the seat or chair and adjust fastening straps to secure. Your

massager won’t slip or slide away.

Note: Do not use this product for more than 15 mins at a time.

There is a 15 minute auto shut-o on this appliance for your safety. This feature

should not be considered as a substitute for ‘OFF’. Always remember to switch

the appliance o when not in use.

MAINTENANCE:

Cleaning

Unplug the appliance and allow to cool before cleaning. Clean only with a soft,

slightly damp sponge.

• Never allow water or any other liquids to come into contact with the appliance.

• Do not immerse in any liquid to clean.

• Never use abrasive cleaners, brushes, glass / furniture polish, paint thinner etc

to clean.

Storage

Place the appliance in its box or

in a safe, dry, cool place. Avoid

contact with sharp edges or

pointed objects which might cut

or puncture the fabric surface. To

avoid breakage, DO NOT wrap the

power cord around the appliance.

DO NOT hang the unit by the cord.

Easy storage

PRODUCT FEATURES: Unique SensaTouch nodes provide a smooth, natural touch massage

1 Demo Button – For a brief demonstration of the features

of the Shiatsu Massaging Cushion, press the Demo button.

The unit will briey go through each function. Once complete,

the unit automatically turns o. The L.E.D. light will blink to

indicate the active functions.

Shiatsu Massage – A deeply relaxing and rejuvenating

experience invented in Japan using rhythmic nger pressure to

stimulate ‘chi’ (vital energy), relieving stress and tension.

2 Shiatsu Programs – Choose from 3 preset programs

where the Shiatsu massage travels up and down in a specic

area of the back. To select a program, simply press the button

and the LED will illuminate. To deselect, press the button again

or press another button.

= Full Back

= Upper Back

= Lower Back

3 Spot Shiatsu – While the unit is in Shiatsu massage,

press either button to stop and focus the Shiatsu action in

one place. Once the unit is operating in Spot Shiatsu, you may

adjust the mechanism position by holding down either button

until the desired position is reached. The Up Arrow will move

the mechanism upwards and the Down Arrow will move it

down. Once you release the button, the mechanism will stop

in that place.

4 Power Button – To turn on the unit, rst press the

POWER button. The LED indicator will illuminate and conrm

your selection. To turn o the unit, simply press the button

again. The LED indicator will blink while the back massage

mechanism returns to its lowest point and then it will turn o.

5 Shiatsu Shoulder Massage – Press the shoulder

button to activate. Adjust the height of the mechanism to meet

your shoulders using and buttons. For soothing heat press

the heat button.

6 Width Adjustment – While the unit is in Rolling

massage for the back, press this button to adjust the distance

or width between the massage heads. With each press, the

massage heads will move to the next available position.

Rolling Massage Rolling is like two hands or thumbs working

up and down your back.

7 Rolling Programs – Choose from 3 preset programs

where the Rolling massage travels up and down in a specic

area of the back. To select a program, simply press the button

and the LED will illuminate. To deselect, press the button again

or press another button.

8 Heat – For soothing heat when massage is on, simply

press the heat button and the corresponding red L.E.D. light

will illuminate. To deselect, press the button again and the

corresponding L.E.D. light will turn o. For your safety, heat

cannot be turned on if massage is not selected.

NOTE The moving dual massage mechanism on the back

always “parks” or nishes in its lowest position. It will

continue to this position after the power has been turned

o. If the electrical supply is interrupted, when power is

restored, the mechanism will “park” or move to its lowest

position.

The actual product materials and fabrics may vary from the

picture shown

Back SensaTouch Shiatsu

massage mechanism

Shoulder SensaTouch

Shiatsu massage

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Homedics MCS-1600H-EU in the language / languages: All languages as an attachment in your email.

The manual is 2,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Homedics MCS-1600H-EU Manual

Product: