UV Bulb Replacement
1. Turn power off and unplug humidifier from the outlet.
2. Remove water tanks and empty all water from the main unit.
3. Remove the two (2) screws from the UV light cover on the bottom of the unit using a Phillips screwdriver
(not included).
4. Carefully pull out the UV holder and replace the UV bulb by screwing out the old bulb, and screwing in the
new one. Do not disconnect the wires.
5. Replace the UV holder, replace and tighten the screws.
CLEANING AND CARE
CAUTION: Before cleaning the unit, turn power off and unplug unit from the outlet.
Tank Cleaning
Remove the water tank from the unit by lifting it from main unit, then
unscrew the tank cap; wipe the tank with a soft cloth then wash it with
clean water.
SUGGESTION: Clean the water tank once every two to three weeks,
depending on your water conditions and usage.
Water Inlet Cleaning
Clean scale or residue with a soft cloth and wash with clean water.
CAUTION: Pour out the excess water, otherwise the water will pour inside
the unit and damage will occur.
Ultrasonic Nebulizer Cleaning
Put small amount of mild dish soap on the surface of the ultrasonic
nebulizer, then pour in some water and soak for 5 minutes. Brush clean
with soft bristle brush (not included) and rinse.
8
GB