623748
20
Zoom out
Zoom in
Previous page
1/24
Next page
Cleaning and maintenance
Do not immerse the equipment in water.
After each use, pull out the attachment comb and remove any remaining hair from the
blade set and the housing opening with the cleaning brush (Fig. 6).
Only wipe the equipment with a soft cloth which may be slightly damp. Do not use
solvents or scouring agents.
It is important to add a drop of oil if you do not use the clipper for a month (Fig.7)
If, despite regular cleaning, the cutting performance drops, the blade set should be
changed.
After use and cleaning of the equipment, the attachment comb also acts as a blade
guard.
Changing the blade set
Switch the equipment off with the On/Off switch (Fig. 2b)
The blade set can be removed by pressing down and away in the direction of the arrow
on the housing (Fig. 6a)
To reuse, place the blade set with the hook engaged into the slot in the housing and
press down into the housing until it snaps into place (Fig. 6b).
Disposal of battery
Please dispose the equipment at the end of its useful life in an environmentally
friendly manner.
Pull the plug-in transformer out of the wall socket and turn the equipment on so that the
battery is fully discharged.
Remove blade set and remove the screw from the bottom housing (Fig.12). Pull apart
the two halves of the housing (Fig. 13).
Remove the circuit board.
Cut the connection plate between battery and circuit board and then remove the battery.
(Fig. 14).
Take the battery to a suitable collection site.
Do not connect to the mains again with the battery removed.
20
ENGLISH
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Home Electric HS3002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Home Electric HS3002 in the language / languages: English, German as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info