To alter the program settings, see instructions below
GB: Programming the Plug-in Receiver
Each remote control socket must be programmed to the remote
control button:
1: Remove the plug-in receiver form the socket
2: Wait +5Sec and plug the receiver in to a socket Fig 1.
2: The LED on the front of the plug-in unit will flash Fig 2.
3: Hold the remote control close to the plug-in receiver socket
4: Press the 'On' button on the remote control Fig 3.
5: The plug-in receiver will now switch On/Off to indicate that the
remote control has been learnt Fig 4.
6: The socket is now ready to be used
up to 3 remote control buttons can be learnt to a single receiver
socket Fig 5
GB: Deleting a Remote Control from a the Plug-in Receiver
1: Remove the plug-in receiver form the socket
2: Plug the receiver in to a socket
3: Wait +5Sec and plug the receiver in to a socket
4: The LED on the front of the plug-in unit will flash
5: Hold the remote control close to the plug-in receiver socket
6: Press the 'Off' button (Fig)
7: The plug-in receiver will now switch On/Off to indicate that the
remote control has been removed from plug-in receiver's memory.
X2
433MHz
R&TTE
APPROVED
CH Byron Electrical United Kingdom. www.chbyron.com
A
B
DK
FIN
F
D
GR
LT
IRL
I
L
NL
P
E
S
UK
BG
CZ
EST
H
IS
LV
M
N
SK
SLO
CH
PL
RO
0560
Project Manager
Mr G Hunter
@
http://www.
GB: Resting Plug-in Socket
To reset and remove all the remote controls learnt to the receiver socket.
1: Remove the plug-in receiver form the socket
2: Plug the receiver in to a socket
3: Wait +5Sec and plug the receiver in to a socket
4: The LED on the front of the plug-in unit will flash
5: Hold the remote control close to the plug-in receiver socket
6: Press the Group Off button
7: The plug-in receiver will now switch On/Off to indicate that the plug-in
remote control socket has been reset.
1
2
2 of 3 Memory Spaces
used.
www.homeeasy.eu
GB: CH Byron
Byron House
Sherwood Rd
Astonfields
Bromsgrove
B60 3DR
UK
Warning: Never exceed the product specification
GB: Specification
Plug-in Receiver Socket: HE330 v2
Input: 230-240V 50Hz
Max Resistive Laod: 3000W
Remote Control: HE312 v2
Range: 30Metres
Battery: CR2032
GB: Replacing Remote Control Battery.
1: Remove the battery cover from the Remote Control
2: Remove the ‘CR2032’ battery using a small screw
driver
2: Insert the new 'CR2032' battery, making sure the '+'
positive terminal is facing up
3: Replace the battery cover on the remote control.
Only use 'CR2032' battery.
WARNING Fire Hazard! Do not burn old batteries.
Dispose or recycle batteries according to local
regulations, do not dispose of as house hold waste.
Do not store batteries in any location where
temperatures may exceed 40°C.
easy
HOME
easy
HOME
X1
Fig 1.
easy
HOME
ON
easy
HOME
ON
easy
HOME
easy
HOME
X2
easy
HOME
ON
easy
HOME
ON
easy
HOME
easy
HOME
1
32
X2
easy
HOME
ON
easy
HOME
ON
easy
HOME
easy
HOME
0 of 3 Memory Space
used.
1
32
Plug-in Receiver Socket 1 On/Off
Group Plug-in Receiver Sockets On/Off
Tel: 0845 2301231 (UK)
Fax: 01527 57701
www.chbyron.com
support@chbyron.com
Fig 3.
Fig 2.
Fig 4.
Fig 5.
Fig 1.
Fig 3.
Fig 2.
Fig 4.
Fig 5.
Fig 1.
Fig 3.
Fig 2.
Fig 4.
Fig 5.
3
0 of 3 Memory Space
used.
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Home Easy HE330 V2 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Home Easy HE330 V2 in the language / languages: English as an attachment in your email.
The manual is 0,31 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
