558740
1
Zoom out
Zoom in
Previous page
1/2
Next page
C H Byron
34, Sherwood Rd
Aston Fields
Bromsgrove
B60 3DR
Contact Details:
433MHz
R&TTE
APPROVED
CH Byron Electrical United Kingdom. www.chbyron.com
A
B
DK
FIN
F
D
GR
LT
IRL
I
L
NL
P
E
S
UK
BG
CZ
EST
H
IS
LV
M
N
SK
SLO
CH
PL
RO
0560
Tel: 0845 2301231
Fax: 01527 557701
Web: www.chbyron.com
E-mail:
support@chbyron.com
HE-209 4Gang Extender
V1.0
The HE-209 is a 4Gang Remote Control extension
socket, simply press "On/Off" to switch on and off 4
appliances in a single press. The HE-209 is part of the
HomeEasy range of products and is designed to work
with all HomeEasy products.
Contact: Helpline: 0845 2301 231
RE-INVENTING THE HOME
Product Operation:
HOME
easy
Pairing/Deleting with Remote Control:
Up to Six remote control units can be paired with each 4Gang Receiver
Socket. To program the 4Gang Extender, insert the Receiver Socket into a
plug socket and switch on the power, now press the "Learn" button. The LED
will start to flash, now press the selected "On" button on the remote control,
the LED will stop flashing. The units are now paired together, you can test this
by pressing the selected "On/Off" button, the red power light will switch
on when the 4gang extension is on.
Product Specification:
4Gang Extension: HE-209
Input: 230V ~50Hz
Range: 30 Metres (Open Distance)
Frequency: 433.92MHz
Max Load: 3000W
(Combined Resistive load)
Indoor Use Only
* All 4 extension sockets will switch on and off together.
Warning: Never Exceed the Product Specification
Learn:
Remote Socket reset:
To delete all the remote control units from the memory of the 4Gang
Extender, hold the "Learn" button until the LED starts to blink
continuously. Press the "Learn" button again, the LED will blink twice to
confirm that all paired remote controls have been deleted from the
receiver sockets memory.
easy
HOME
FUSE
Fuse 13Amp BS1362.
easy
HOME
Deleting Remote Control:
To delete a remote control that has been paired with a 4Gang Extender, simply
press the "Learn" button. The LED will start to blink; press the "Off" button on
the remote control, the LED will blink twice to confirm that the remote control
has been removed from the receiver sockets memory.
The HE-209 has a max combined load for
the 4 individual extension sockets
of 3000W.
Remote Control: HE-300
Input: 3v Cr2032 (Byron Sx100)
Frequency: 433.92MHz
Indoor Use Only
Remote control unit:
Pull out the battery slide holder from the bottom of the controller. Replace the
CR2023 (Byron SX100) battery making sure the polarity is correct as per markings
inside the case.
Outdoor Socket:
No batteries are required for the 4gang Extension unit.
Changing Battery:
The HE-209 is fitted with a 13Amp BS1762, to replace the fuse:
1: Using a small screwdriver remove the fuse holder from the 4gang extension unit.
2: Replace the fuse with a 13Amp BS1762.
3: Replace the fuse holder, making sure the holder is correctly pushed in.
Changing Fuse:
2M
Remote Receiver
Socket
4Gang Extender
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Home Easy HE-209 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Home Easy HE-209 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info