30194
6
Zoom out
Zoom in
Previous page
1/8
Next page
4) Check the direction of the servo rotation. If you wish to change the direction of the
servo, push the servo reversing switch and check if it changes direction as you desired.
(See fig 4)
5) If you wish to have more forward throttle than backward, you can push down the neutral
position adjustment lever. You will have 30% more forward than backward. The control
stick will only return to the lower position. You may have to adjust the servo horn posi-
tion when you do this.
6) Adjustable Travel Volume: you may use this volume to adjust servo travel according to
the characteristics of your model; the servo travel can be adjusted from 50% to 100% of
the total travel range by turning each ATV knob on the transmitter. (See fig 5). Turning
clockwise will increase servo travel and counter clockwise will decrease servo travel.
7) Quick Start/Brake: This button is located at the back of the transmitter and is a conve-
nient feature if you ever get involved in competition racing. While pressing the button
with you little finger, you hold the throttle stick at full throttle, then let go at the start
signal by releasing the button. This button also doubles as a quick brake when you
need it. Instead of throwing the throttle stick down, you can simply press this button to
bring your car to a screeching halt. Before using the Quick Start/Brake feature, you
should preset the braking point by adjusting the Throttle Quick Trim as follows; With the
throttle stick set in neutral for your servo or speed control, press the Quick Start/Brake
button to see if braking position is correct. If not, adjust the trim. You may adjust the trim
while the car is running but you would have to take extra care so it does not get out of
control. (See fig 6)
8) If everything checks OK, turn your receiver off before you turn your transmitter off.
Remember that this is exactly the reverse sequence of turning the system “ON”.
Reverse Normal
Normal
Reverse
Normal
Reverse
Reduced
Trave l
Stick control fig 4
Servo traveling adjustment fig 5 Quick start/break function fig 6
FULL TRAVEL
Quick Start/Brake button
CH1 ATV CH2
CH1 ATV CH2
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitec RANGER_IIFM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitec RANGER_IIFM in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info