30176
11
Zoom out
Zoom in
Previous page
1/12
Next page
* Set the thr* Set the thr
* Set the thr* Set the thr
* Set the thr
ottle trottle tr
ottle trottle tr
ottle tr
im in the centerim in the center
im in the centerim in the center
im in the center Adjust Neutral Point
Brake or Reverse
Throttle Trigger
Neutral Position
Full Forward
90%
Adjust Full Power Position
10
Adjust the full power position of the ESC (forward only) when the trigger is pulled
approximately 90% of the way. If the vehicle does not move forward when the trigger
is pulled and does when the trigger is pushed, check the motor connection first. If that
is correct then switch the throttle reversing switch to the opposite direction.
Adjusting the full power position of the ESC (reversible version) is the same as the
forward only, except you must make sure you are adjusting the forward not the reverse.
If the trigger is pulled and the full power adjustment does not affect the speed but does
when the trigger is pushed, the servo reversing switch for the throttle needs to be changed
to the opposite direction. After this is determined, use the same 90% as discussed
previously for forward. Reverse on most speed controls is not adjustable.
- Using thr- Using thr
- Using thr- Using thr
- Using thr
ottle serottle ser
ottle serottle ser
ottle ser
vv
vv
v
o fo f
o fo f
o f
or gor g
or gor g
or g
as poas po
as poas po
as po
ww
ww
w
erer
erer
er
ed ved v
ed ved v
ed v
ehicehic
ehicehic
ehic
lele
lele
le
Gas powered vehicles require the throttle servo to be set up to operate the carburetor and
brakes together. The EPAs are used in these cars to set the proper throw for the throttle
and brakes. Setups are different for individual applications so consult the manufactures
manual for the proper setup procedure.
- Using thr- Using thr
- Using thr- Using thr
- Using thr
ottle End Pottle End P
ottle End Pottle End P
ottle End P
ointoint
ointoint
oint
Adjustments (E.PAdjustments (E.P
Adjustments (E.PAdjustments (E.P
Adjustments (E.P
.A.).A.)
.A.).A.)
.A.)
Throttle (EPA) can be used in conjunction with electronic and mechanical speed controls
as well as gas powered cars. Use the EPA to select the proper amount of travel for the
throttle and brake.
FCC INFORMAFCC INFORMA
FCC INFORMAFCC INFORMA
FCC INFORMA
TIONTION
TIONTION
TION
TRANSMITTER FREQUENCIES CAN ONLY BE CHANGED BY AN AUTHORIZED HITEC RCD SERVICE CENTER. CHANGING
FREQUENCIES BY THE CONSUMER WILL VOID THE WARRANTY AND IS A VIOLATION OF FCC REGULATIONS.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitec LINX_FM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitec LINX_FM in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info