30164
6
Zoom out
Zoom in
Previous page
1/8
Next page
5
The trim lever on each control stick is used to correct (trim out) flight
characteristics. After the initial test flight note the positions of the control surfaces that
required trim. Next center trim levers, turn off the receiver radio. Now adjust the control
clevises of the surfaces that required trim so that the surfaces are in the same position
before the trim levers were re-centered. Turn on the receiver radio and recheck the control
surface to ensure that all the corrections were applied in the correct direction.
5. Operation & adjustment
A. Control stick length & tension & trim lever adjustments
The unique open-stick assembly
provides fully adjustable stick tension
“feel”. Turning the tension adjustment
screw counter clockwise will soften
(decrease the tension) the feel of the
Control stick (fig 4)
CP- variable resistors improve the
neutral characteristics and resolution of
the servo positioning.
All of the molded parts are
fabricated from high-grade
polycarbonate that is unaffected by
temperature and humidity.
Turn with a Phillips
screwdriver
The spring becomes
stronger when the
screw is turned
counterclockwise
The length of the nonslip control sticks can be adjusted to suit the require-
ments of the operator. (fig 5)
fig 4
Set to the desired length by
turning the knob, then lock.
Adjusting knob
Unlock
fig 5
Remove the transmitter rear
cover and open the P.C. Board
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitec FOCUS_6_FM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitec FOCUS_6_FM in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info