Manual Hitachi UC18YGSL (page 7 of 44) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

571378

Zoom out

Zoom in

1/44

English

APPLICATION

For charging the HITACHI BATTERY

⅜ BSL1415, BSL1415X, BSL1430, BSL1815, BSL1815X,

BSL1830

CHARGING

Before using the power tool, charge the battery as

follows.

1. Connect the charger’s power cord to the receptacle.

When connecting the plug of the charger to a

receptacle, the pilot lamp will blink in red

(At 1-second intervals).

2. Insert the battery into the charger.

Firmly insert the battery into the charger as shown

in Fig. 1.

3. Charging

When inserting a battery in the charger, the pilot

lamp will light up continuously in red.

When the battery becomes fully recharged, the pilot

lamp will blink in red (At 1-second intervals).

(See Table 1)

(1) Pilot lamp indication

The indications of the pilot lamp will be as shown

in Table 1, according to the condition of the charger

or the rechargeable battery.

Table 2

Temperatures at which the battery can be recharged

0°C — 50°C

(2) Regarding the temperature of the rechargeable

battery

The temperatures for rechargeable batteries are as

shown in the Table 2, and batteries that have become

hot should be cooled for a while before being

recharged.

(3) Regarding recharging time

Table 3 shows the recharging time required

according to the type of battery.

Table 3 Recharging time (approx. min.) at 20°C

NOTE: The recharging time may vary according to the

ambient temperature.

4. Disconnect the charger’s power cord from the

receptacle.

5. Hold the charger firmly and pull out the battery.

NOTE

Be sure to pull out the battery from the charger

after use, and then keep it.

Regarding electric discharge in case of new batteries,

etc.

As the internal chemical substance of new batteries

and batteries that have not been used for an

extended period is not activated, the electric

discharge might be low when using them the first

and second time. This is a temporary phenomenon,

and normal time required for recharging will be

restored by recharging the batteries 2-3 times.

How to make the batteries perform longer.

(1) Recharge the batteries before they become

completely exhausted.

When you feel that the power of the tool becomes

weaker, stop using the tool and recharge its battery.

If you continue to use the tool and exhaust the

electric current, the battery may be damaged and

its life will become shorter.

Table 1

Indications of the pilot lamp

Lights for 0.5 seconds. Does not light for

0.5 seconds. (off for 0.5 seconds)

Lights continuously

Lights for 0.5 seconds. Does not light for

0.5 seconds. (off for 0.5 seconds)

Lights for 1 second. Does not light for

0.5 seconds. (off for 0.5 seconds)

Before

charging

While

charging

Charging

complete

Blinks

Lights

Blinks

Battery overheated.

Unable to charge.

(Charging will commence

when battery cools)

Pilot lamp

(red)

Overheat

standby

Lights for 0.1 seconds. Does not light for 0.1

seconds. (off for 0.1 seconds)

Charging

impossible

Flickers

Malfunction in the

battery or the charger

Battery capacity (Ah)

Battery

Li-ion BATTERY

Voltage

(V) 1.5 Ah 3.0 Ah

14.4V

BSL1415, BSL1415X

40 min.

BSL1430

90 min.

(4 cells) (8 cells)

18V

BSL1815, BSL1815X

40 min.

BSL1830

90 min.

(5 cells) (10 cells)

01Eng_UC18YGSL_WE_NE 12/3/10, 11:186

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi UC18YGSL in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi UC18YGSL Manual

Product: