214485
76
Zoom out
Zoom in
Previous page
1/82
Next page
65
ENGLISH
Troubleshooting
Phenomena that may be easily mistaken for machine defects (continued)
Phenomenon Cases not involving a machine defect
No pictures are
output.
Colors have
a faded-out
appearance, or
Color tone is poor.
Pictures appear
dark.
Pictures appear
blurry.
Signal source does not work correctly.
Correctly set up the signal source device by referring to the manual
for the source device.
The brightness is adjusted to an extremely low level.
Adjust the BRIGHTNESS (27, 33, 37) to a higher level using the
menu function or the remote control.
The computer cannot detect the projector as a plug and play
monitor.
Confirm that the computer can detect a plug and play monitor using
another plug and play monitor (16).
If the connected PC has a HDMI output, the driver software of
the HDMI board is too old.
Consult with your PC dealer to install new software.
The signal source cannot output both a HDMI signal and a VGA
signal simultaneously.
Disconnect the VGA connection when you use the HDMI input
(14, 15).
If the output signal can be selected on the PC, it is not selected
properly.
Check the settings. Select the digital output for HDMI connection.
Color settings are not correctly adjusted.
Perform picture adjustments by changing the COLOR TEMP (39),
COLOR (27, 33, 40), TINT (33, 40) and COLOR SPACE (45).
COLOR SPACE setting is not suitable.
Change the COLOR SPACE (
45).
The brightness or contrast is adjusted to an extremely low level.
Adjust the BRIGHTNESS (27, 33, 37) and CONTRAST (27,
33, 37) to a higher level.
The WHISPER function is enabled.
Set the WHISPER item (48) in the SETUP menu to normal.
The lamp is approaching the end of its product lifetime.
Replace the lamp (53, 57).
Either the focus or horizontal phase setting is not properly
adjusted.
Check and adjust the focus (22), and H PHASE (44).
The lens is dirty or fogged.
Clean the lens according to the directions in “Lens” (60).
(Continued on next page)
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi pj tx200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi pj tx200 in the language / languages: English as an attachment in your email.

The manual is 8,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info