568914

Hitachi NV90AB Manual

5
Zoom out
Zoom in
Previous page
1/56
Next page
4
English
⅜ Adjust the position of the nail holder according to the
length of the nail. (Fig. 2)
Fig. 2
For adjustment, turn the nail holder 1
counterclockwise about 90 degrees. Move the nail
holder 2 up and down, adjust to the length of a nail
to be used, and adjust the surface of the nail holder
to the marked position of the magazine.
Turn the nail holder 3 clockwise (about 90 degrees)
until it goes click. (Fig. 3)
Fig. 3
⅜ Load the nails in the magazine. Load the nails in the
magazine. At this time, if the wound portion of nails
is inserted after it is once pulled out beforehand, the
subsequent work can be much facilitated. (Fig.4)
Fig. 4
⅜ Close the cover after confirming that the nails are
loaded in the magazine.
NOTE:
Before loading the nails in the magazine, position the
nail holder according to the length of the nail. If the
nail holder position is not adjusted, the nail jams. If
the cover is forcibly closed without adjusting the
position of the nail holder, the nail holder may be
damaged.
(2) Load nails in the guide
Extend the nail line from the magazine.
Insert the first nail into the driving hole and the
second nail between the pawls of the feeder. Insert
the nail so that the nail head engages the guide slot.
(Fig. 5)
Fig. 5
(3) Close nail guide
After making sure that the magazine cover is closed,
hook your finger to the nail guide and the knob, and
while pushing the knob down, turn the nail guide
clockwise to completely close it. (Fig.6)
The above operation completes the loading of nails.
Fig. 6
NOTE:
The nail guide may not close properly or the nails
may not advance properly if the linked bands or nails
do not enter into the indicated position or the nails
come away from the guide surface or the wire linking
the nails is warped.
Cover
Magazine
Nail Holder
For 57,65mm
For 90mm
For 75mm
For 45,50mm
Nail Holder
Magazine
Magazine
Cover
Nail
Nagagine
Opening
Nail Guide
Guide Slot
Feeder
Nail outlet
Feeder
First Nail
Knob
Nail Guide
Cover
Guide Surface
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi NV90AB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi NV90AB in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info