Manual Hitachi NV65AD3 (page 2 of 52) (English, German, Dutch, French, Italian, Spanish)

568909

Zoom out

Zoom in

1/52

English

GENERAL OPERATIONAL PRECAUTIONS

1. Operate the power tool safely for correct uses.

Do not use the power tool for uses other than those

specified in this instructions.

2. For safe operation handle the power tool correctly.

Please follow the instructions given in this instruction

manual and correctly handle this tool so as to ensure

safe operation. Never let the tool be use by children

or people who do not know enough to be able to

handle it correctly, or let it be used by people who

cannot operate it correctly.

3. Confirm the safety of the workshop.

Keep unauthorized people away from the workshop.

Especially children should be kept away.

4. The right parts in the right places.

Do not remove any of the covers or screws. Keep

them in place as they have their functions.

Moreover, because it would be dangerous, never

make modifications to the tool or use it after making

modifications.

5. Check the tool before using it.

Before using the tool, always check that no parts of

it are broken, that all screws are completely tight,

and that no parts are missing or rusty.

6. Excessive work could cause accidents.

Do not make tools and accessories work beyond

their abilities. Excessive work not only damages the

power tool but also is dangerous in itself.

7. Stop operation immediately if abnormalities are

noticed.

Stop operation if you notice abnormalities, or if the

power tool does not work properly; have the power

tool inspected and serviced.

8. Look after the power tool carefully.

If you drop or knock the power tool against things,

the outer frame may be deformed and cracks or

other kinds of damage may occur, so please handle

it with sufficient care. Also, do not scratch or engrave

signs on the power tool. Owing to high pressure air

inside the tool, cracks in the surface are dangerous.

Never use the power tool if a crack develops or if air

is escaping from a crack.

9. Take good care for a long life.

Always take good care of the power tool and keep it

clean.

10. Inspection at regular intervals is essential for safety.

Inspect the power tool at regular intervals so that the

power tool can be operated safety and efficiently at

all times.

11. Consult an authorized service center if repair or

parts replacement is necessary.

Ensure that the power tool is serviced by authorized

service center only, and that only genuine

replacement parts are used.

12. Keep the power tool in a proper place.

When not in use, the power tool should be kept in a

dry place out of the reach of children. Put into the

body about 2cc oil through the hose joint to protect

the tool from rust.

13. The exploded assembly drawing on this handling

instructions should be used only for authorized

service center.

PRECAUTIONS ON USING NAILER

1. Safe operation through correct usage

This tool was designed for driving nails into wood

and similar materials. Use it for its intended purpose

only.

2. Make sure air pressure is within the rated range of

air pressure.

Please make sure that the air pressure is within a

range of 4.9 bar – 8.3 bar (70 ~ 120 psi.), and that the

air which is used is clean and dry. If the air pressure

is greater than 8.3 bar (120 psi.), the life of the power

tool will be shortened and dangerous conditions

could develop. Tools shall not be connected to

pressure which potentially exceeds 14 bar (200 psi.).

3. Never operate the equipment with high-pressure

gases other than compressed air.

Never use carbon dioxide, oxygen or another gas

from pressurized containers under any

circumstances.

4. Be careful of ignition and explosions.

Since sparks may fly during nailing, it is dangerous

to use this tool near lacquer, paint, benzine, thinner,

gasoline, gas, adhesives and similar inflammable

substances as they may ignite or explode. Under no

circumstances should this tool therefore be used in

the vicinity of such inflammable material.

5. Always wear eye protection (protective goggles).

When operating the power tool, always wear eye

protection, and ensure that surrounding people wear

eye protection too.

The possibility of fragments of the wire or plastic

linking the nails or nails that were not properly hit

entering the eye is a threat to sight. Eye protection

can be bought at any hardware store. Always wear

eye protection while operating this tool. Use either

eye protection or a wide vision mask over prescription

glasses.

Employers should always enforce the use of eye

protection equipment.

6. Protect your ears and head.

When engaged in nailing work please wear ear

mufflers and head protection. Also, depending on

condition, ensure that surrounding people also wear

ear mufflers and head protection.

7. Pay attention to those working close to you.

It would be very dangerous if nails that were not

properly driven in should hit other people. Therefore,

always pay attention to the safety of the people

around you when using this tool. Always make sure

that nobody’s body, hands or feet are close to the

nail outlet.

8. Never point the nail outlet towards people.

Always assume the tool contains fasteners.

If the nail outlet is pointed towards people, serious

accidents may be caused if you mistakenly discharge

the tool. When connecting and disconnecting the

hose, during nail loading or similar operations, be

sure the nail outlet is not pointed towards anyone

(including yourself). Even when no nails are loaded

at all, it is dangerous to discharge the tool while

pointing it at someone, so never attempt to do so. No

horseplay. Respect the tool as a working implement.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi NV65AD3 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi NV65AD3 Manual

Product: