568908
5
Zoom out
Zoom in
Previous page
1/52
Next page
4
English
NOTE:
Before loading the nails in the magazine, position the
nail holder according to the length of the nail. If the nail
holder position is not adjusted, the nail jams. If the
cover is forcibly closed without adjusting the position
of the nail holder, the nail holder may be damaged.
(2) Load nails in the guide
Extend the nail line from the magazine.
Insert the first nail into the driving hole and the
second nail between the pawls of the feeder. Insert
the nail so that the nail head engages the guide slot.
(Fig. 5)
Fig. 5
(3) Close nail guide
After making sure that the cover is closed, hook your
finger to the nail guide and the knob, and while
pushing the knob down, turn the nail guide clockwise
to completely close it. (Fig. 6)
The above operation completes the loading of nails.
Fig. 6
NOTE:
The nail guide may not close properly or the nails may
not advance properly if the linked bands or nails do
not enter into the indicated position or the nails come
away from the guide surface or the wire linked nails
are warped.
CAUTION:
To prevent unintentional operation, never touch the
trigger or place the top end of the push lever on a work
bench or floor. Also, never face the nail outlet toward
any of a person.
Adjust the position of the nail holder according to the
length of the nail. (Fig. 2)
Fig. 2
For adjustment, turn the nail holder 1
counterclockwise about 90 degrees. Move the nail
holder 2 up and down, adjust to the length of a nail
to be used, and adjust the surface of the nail holder to
the marked position of the magazine.
Turn the nail holder 3 clockwise (about 90 degrees)
until it goes click. (Fig. 3)
Fig. 3
Load the nails in the magazine.
At this time, if the wound portion of nails is inserted
after it is once pulled out beforehand, the subsequent
work can be much facilitated. (Fig. 4)
Fig. 4
Bring the nail holder down to the magazine side,
and close the cover after making sure that the nails
are completely loaded in the magazine.
Magazine
Nail Holder
Cover
Magazine
Cover
Nail
Magazine
Opening
Nail Holder
First Nail
First Nail
Guide Slot
Feeder
Guide Surface
Nail outlet
Feeder
Nail Guide
Nail Guide
Cover
Knob
Magazine
Nail Holder
For 27 mm
For 32, 38 mm
For 45, 50 mm
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi NV50AH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi NV50AH in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info