568902

Hitachi NV45AB2 Manual

5
Zoom out
Zoom in
Previous page
1/56
Next page
4
English
3. Load nails
(1) Grip the nail guide and knob with your fingers. Press
the knob down and swing the nail guide open. Then
open the magazine cover. (Fig. 1)
Fig. 1
(2) Adjust the position of the nail holder according to the
nail length. (Fig. 2)
The nail will not feed smoothly if the nail holder is not
correctly adjusted.
1 Turn the nail holder about 90 degrees
counterclockwise.
2 Move the nail holder up and down to align the
plate of the nail holder with a mark on the magazine
in accordance with the length of the nails being
used.
3 Turn the nail holder 90 degrees clockwise until you
hear "click".
Fig. 2
NOTE:
Before loading nails in the magazine, adjust the nail
holder. If the magazine cover is forcibly closed without
adjusting the nail holder correctly, the nail holder may
be damaged.
(3) Place the nail coil in the magazine.
Insert the first nail into the magazine opening. (Fig. 3)
Fig. 3
(4) Close the magazine cover.
(5) 1 Uncoil enough nails to reach the driving hole.
2 Insert the first nail into the driving hole and the
second nail between the two pawls of the feeder.
3 Fit the nail heads in the guide slot. (Fig. 4)
Fig. 4
NOTE:
Be careful not to deform the collated wires and not to
disengage the nails with the guide surface.
Otherwise, the nail guide will not close correctly.
4 Pulling the nails to the right
After checking and making sure that the magazine
cover is closed, hook your fingers on the nail guide
and knob, turn the nail guide clockwise while
pressing the knob downward, and then close the
nail guide completely. (Fig. 5)
Fig. 5
Nail Guide
Knob
Magazine
Cover
Magazine
For 22 mm, 25 mm,
32 mm (7/8", 1" and
1-1/4")
For 38 mm (1-1/2")
Plate
For 45 mm (1-3/4")
1
2
3
Nail Holder
First Nail
Magazine
Magazine Opening
Nail
Driving Hole
First Nail
Nail Guide
Guide Slot
Pawl
Guide Surface
Feeder
1
2
3
2
4
4
Knob
4
Nail Guide
Magazine Cover
01Eng_NV45AB2_WE 3/24/09, 14:554
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi NV45AB2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi NV45AB2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info