Manual Hitachi DV16VSS (page 6 of 40) (English, German, Dutch, French, Italian, Portuguese, Spanish)

566545

Zoom out

Zoom in

1/40

English

IMPACT DRILL SAFETY WARNINGS

1. Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

2. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory

may contact hidden wiring or its own cord.

Cutting accessory contacting a "live" wire may make

exposed metal parts of the power tool "live" and

could give the operator an electric shock.

4. When boring concrete or similar hard materials in

IMPACT mode, turn the rotational change lever to

the R-mark. (Fig. 9)

SPECIFICATIONS

*Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

Standard accessories are subject to change without

notice.

OPTIONAL ACCESSORIES (sold separately)

⅜ Impact Drill Bit (for concrete)

3.2 mm – 20 mm dia.

Optional accessories are subject to change without notice.

APPLICATIONS

⅜ By combined actions of ROTATION and IMPACT:

Boring holes in hard materials (concrete, marble,

granite, tiles, etc.)

⅜ By ROTATIONAL action:

Boring holes in metal, wood and plastic.

Model Drill chuck spec. Standard accessories

DV13SS Keyed Chuck wrench ............. 1

Keyed Chuck wrench ............. 1

Case ............................ 1

DV13VSS

Keyless Depth gauge ............... 1

Side handle ................ 1

Chuck wrench ............. 1

DV16SS Keyed Depth gauge ............... 1

Side handle ................ 1

Chuck wrench ............. 1

Keyed Depth gauge ............... 1

DV16VSS

Side handle ................ 1

Case ............................ 1

Keyless Depth gauge ............... 1

Side handle ................ 1

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements specified on the product

nameplate.

2. Power switch

Ensure that the power switch is in the OFF position. If

the plug is connected to a receptacle while the power

switch is in the ON position, the power tool will start

operating immediately, inviting serious accident.

3. Extension cord

When the work area is removed from the power

source. Use an extension cord of sufficient thickness

and rated capacity. The extension cord should be

kept as short as practicable.

4. Selecting the appropriate drill bit

⅜ When boring concrete or stone

Use the drill bits specified in the Optional Accessories.

⅜ When boring metal or plastic

Use an ordinary metalworking drill bit.

⅜ When boring wood

Use an ordinary woodworking drill bit.

However, when drilling 6.5 mm or smaller holes, use

a metalworking drill bit.

5. Mounting and dismounting of the bit

For Drill chuck with chuck wrench (Fig. 1)

(1) Open the chuck jaws, and insert the bit into the

chuck.

(2) Place the chuck wrench in each of the three holes

in the chuck, and turn it in the clockwise direction

(viewed from the front side). Tighten securely.

(3) To remove the bit, place the chuck wrench into one

of the holes in the chuck and turn it in the

counterclockwise direction.

Model DV13SS DV13VSS DV16SS DV16VSS

Voltage (by areas)* (110 V, 120 V, 127 V, 220 V, 230 V, 240 V)

Power input* 550 W 600 W

Reversible None Yes None Yes

No load speed 2900 min

-1

0 – 2900 min

-1

2900 min

-1

0 – 2900 min

-1

Drill chuck capacity 13 mm

Steel 13 mm

Concrete 13 mm 16 mm

Wood 20 mm 25 mm

Full load impact rate 29000 min

-1

Weight (without cord) 1.4 kg 1.5 kg

Capacity

01Eng_DV13SS_WE 4/23/12, 4:24 PM5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DV16VSS in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi DV16VSS Manual

Product: