161575
3
Zoom out
Zoom in
Previous page
1/16
Next page
3
WARNING
To prevent fire or shock hazard, do not expose this appliance to dripping, splashing,
rain or moisture.
DANGER
LASER SAFETY
This unit employs an optical laser beam system in the CD mechanism, de-
signed with built -in safeguards. Do not attempt to disassemble, refer to quali-
fied service personnel. Exposure to this invisible laser light beam may be
harmful to the human eye.
THIS IS A CLASS-1 LASER PRODUCT.
USE OF CONTROLS, OR ADJUSTMENTS
OR PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN, MAY RESULT IN
HAZARDOUS LASER LIGHT BEAM
EXPOSURE.
SAFEGUARDS
Electrical energy can perform many useful functions. This unit has been engineered and
manufactured to assure your personal safety. Improper use can result in potential electrical
shock or fire hazards. In order not to defeat the safeguards, observe the following instructions
for its installation, use and servicing.
SAFETY PRECAUTIONS
1. Never open the covers or touch the inside or insert a metal object. Any of these
operations could cause an electric shock or a fault.
2. Do not expose to vibration or shock, dust, moisture,direct sunlight or excessive
heat such as inside the confined vechicles, etc. for a long period.
3. Use ONLY the AC adaptor provided, others may damage your unit. Disconnect
from the wall AC supply outlet when the set is not to be used for an extended
period of time.
4. When cleaning your unit, use a soft dry cloth to wipe off surface dirt. Do not use
solvents or commercially available cleaners as these may damage or discolour
the finish.
5. Do not wear earphones while operating a motor vehicle, this could create a traffic
hazard and is illegal in many areas.
6. The earphones supplied with your unit provide super stereo listening while allow-
ing you to hear outside sounds when listening at normally low volume levels.
Listening at extremely high volume levels minimizes the intrusion of outside sounds
and may impair your hearing.
INVISIBLE LASER RA-
DIATION WHEN OPEN
AND INTERLOCK
FAILED OR DEFEATED.
AVOID DIRECT EXPO-
SURE TO LASER BEAM.
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product, to which this declara-
tion relates, is in conformity with the following standards:
EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3.
Following the provisions of 73/23/EEC, 89/336/EEC and 93/68/EEC Directives.
This is shown on the bottom of the unit.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi dap 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi dap 30 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info