Manual Hitachi CR 13 VBY (page 8 of 12) (English)

110241

Zoom out

Zoom in

1/12

4. Plunge cutting

With this tool, you can perform plunge cutting on

plywood panels and thin board materials. You can

carry out pocket cutting quite easily with the saw blade

installed in reverse as illustrated in Fig. 24, Fig. 26,

and Fig. 28. Use the saw blade that is as short and

thick as possible. We recommend for this purpose that

you use BI-METAL Blade No. 132 mentioned in Table

2. Be sure to use caution during the cutting operation

and observe the following procedures.

(1) Press the lower part (or the upper part) of the base

against the material. Pull the switch trigger while

keeping the tip of the saw blade apart from the

material. (Fig. 23, Fig. 24)

Fig. 23

Fig. 24

(2) Raise the handle slowly and cut in with the saw blade

little by little. (Fig. 25, Fig. 26)

Fig. 25

Fig. 26

(3) Hold the body firmly until the saw blade completely

cuts into the material. (Fig. 27, Fig. 28)

Fig. 27

Fig. 28

CAUTION

䡬 Avoid plunge cutting for metallic materials. This can

easily damage the blade.

䡬 Never pull the switch trigger while the tip of the saw

blade tip is pressed against the material. If you do so,

the blade can easily be damaged when it collides with

the material.

䡬 Make absolutely sure that you cut slowly while holding

the body firmly. If you apply any unreasonable force

to the saw blade during the cutting operation, the

blade can easily be damaged.

SELECTION OF BLADES

To ensure maximum operating efficiency and results, it is

very important to select the appropriate blade best suited to

the type and thickness of the material to be cut.

NOTE:

䡬 Dimensions of the workpiece mentioned in the table

represent the dimensions when the mounting position

of the base is set nearest to the body of the

reciprocating saw. Caution must be exercised since

dimensions of the workpiece will become smaller if

the base is mounted far away from the body of the

reciprocating saw.

1. Selection of HCS blades

The blade number of HCS blades in Table 1 is

engraved in the vicinity of the mounting position of

each blade. Select appropriate blades by referring to

Tables 1 and 4 below.

01Eng_CR13VBY_Eng.p65 7/19/12, 4:34 PM7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CR 13 VBY in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi CR 13 VBY

Hitachi CR 13 VBY User Manual - English - 60 pages

Hitachi CR 13 VBY User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 60 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi CR 13 VBY Manual

Product: