54239
18
Zoom out
Zoom in
Previous page
1/22
Next page
GB - 17 -
After APS is finalized, a rank list will appear on the
screen. In the rank list you will see the programme num-
bers and names, assigned to the programmes. First the
programme with programme number 1 will be displayed
and the programme number 1 will be flashing. Using
“ or or or key you can move the
flashing number and then display the programme cor-
responding to the flashing number pressing RED but-
ton.
If you do not accept the correspondence between pro-
gramme numbers and names and want to change them,
press
MENU” button and then BLUE button, so that
you enter the Install menu. In the Install menu select
TUNING menu and enter it. To use tuning menu, refer
to the Tuning submenu in the Install Menu section of this
manual.
TV Setup Menu
This menu is used to select the Menu Language, the
Country name and to select source of AV-2 Out
(Scart2).
Selecting Menu Language
To select menu language:
Press the "
MENU " button so that you enter the
main menu.
In the main menu select Install using the
“ or
buttons.
Open the install menu by pressing either of the
or “
” buttons.
(The Install menu can be entered directly by pressing
the blue button on the remote control handset.)
In the Install Menu select TV SETUP using the
or “
buttons.
Open the TV SETUP Menu using either of the
or “
buttons.
In the TV SETUP Menu select language and you can
change the language to the one you require, using ei-
ther of the
or buttons. As soon as you
change the language, the menu items will be dis-
played in the selected language.
Selecting the Country
Press the "
MENU " button so that you enter the
main menu.
In the main menu select Install using the
or
” buttons.
Open the Install menu by pressing either of the
“ or “ ” buttons.
(To open the Install Menu directly, do not enter the main
menu just press the BLUE button located on the remote
control handset.)
In the install menu select TV Setup using the
“ or
” buttons.
In the TV Setup menu select Country using the
or “
” buttons.
The country can be changed by pressing either of the
“ or “ ”' buttons.
Setting External Source Output
You can use this menu to select the internal or exter-
nal source that will be output at euroscart2.
To set AV-2 Output:
Press “
MENU button so that you enter the main
menu.
In the main menu select Install using
“ or
button.
Open the Install Menu pressing “ or ” but-
ton. (To open the Install Menu directly, do not enter
the main menu but only press the BLUE button).
In the Install Menu select TV Setup using
“ or
” button.
Open the TV Setup menu using “ or but-
ton.
In the TV Setup menu select AV-2 Output using
or
” button. Then select the source you want to
be output at scart2 pressing
or button
(one of the sources: TV, AV-1 (Scart1) or AV-3 (Front
AV).
Other Features
Sound Mute
To cut off the TV sound, press the " " button. This will
mute the sound.
To bring back the sound, press the "
" button or press
either of the
“ or ” buttons. The sound will return
to its previous level.
Blue Background During No-Signal
In case, no valid signal is detected (in TV or AV mode)
Blue Background is activated.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CL28W440AN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CL28W440AN in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info