543121
118
Zoom out
Zoom in
Previous page
1/122
Next page
118
Phenomenon Cases not involving a machine defect
Reference
page
The pen does
not operate.
This may be due to poor contact of the battery.
Remove the battery and load it again.
Be sure to use only the batteries specied.
19
Has the battery run out?
Replace it with a new one.
19
The “StarBoard Software” les may be corrupted, or
installation may not have completed successfully.
Uninstall the “StarBoard Software” and reinstall it.
86
Is the projector positioned too close to the screen?
Install and use at a position where the screen size is between
60"-100" when digital zoom is at the maximum (100%).
45
Is the pen position calibrated?
Perform calibration of the pen position.
34
Are the projector and screen used at the following places?
- Place where wind from the air-conditioner etc. is blowing
directly on the screen.
- Place near an inverter uorescent light.
- Place surrounded by walls or ceiling made of materials
that allow easy sound reection, such as metal.
- Place near a CRT display, TV, etc.
- Place that is exposed to direct sunlight.
- Place that is exposed to speaker sound or noise.
-
Place where more than one projector is installed in the same room.
- Place where equipment used emits ultrasonic waves or
vibrates.
81, 82
Are you using more than one pen at the same time?
Only one pen can be used at a time.
19
Is transmission between the pen and the projector obstructed?
Make sure that the area between the sensor at the top
surface of the projector and the screen is not obstructed
(transparent and meshed objects are also not allowed). For
example, the Interactive Function does not function if the
projector is enclosed with only the lens exposed, such as
when a casing for theft prevention is used.
84
Is dust accumulated on the two horns of the pen sensor?
Check the horns of the pen sensor, and remove any dust
accumulated on them using a vacuum cleaner.
107
Is the volume from the speaker of the projector too loud?
Loud volume may affect the operation of the pen depending
on the environment where it is used. Try lowering the volume.
22, 48
Other than those above
Restart Windows
®
and “StarBoard Software”.
(continued on next page)
Phenomena that may be easy to be mistaken for machine defects (continued)
Troubleshooting
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi BZ-1M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi BZ-1M in the language / languages: English as an attachment in your email.

The manual is 10,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info