160236
15
Zoom out
Zoom in
Previous page
1/18
Next page
UK-14
SLEEP FUNCTION (remote control only)
This function allows you to program the system to switch off itself after a set period of time. You can set
your sleep time in power on mode:
1. To activate the sleep function, press the SLEEP button on the remote, the display will show “SLEEP-
90” and flash.
2.
R epeatedly press the SLEEP button to select the sleep time, it will change in sequence on every
press:
3. When the display shows your desired sleep time, release the
button, the sleep timer is now activated. The display will show
“S#” in which “S1” is to indicate “10 minutes”
sleep time and
so on. When the sleep time counts to zero, the unit will go
off.(F22)
4. To cancel sleep, press the SLEEP button once again, the
display will show “SLEEP-OFF” and the “S#” will disappear.
80
70 50 40 30 10
90
60
20
OFF
F22
TIMER FUNCTION
This function allows you to switch on and off the system at your desired time and mode:
1. Press the TIMER button to toggle the timer function between on and off, the display will show “Timer
On” or “Timer Off ”. The display will show to
indicate timer function on.(F23)
2. To set the on timer clock, press and hold the TIMER button until the display shows “On Timer” and the
“hour” digit of the timer clock will flash.(F24)
3. Press the PS/FOLDER + or PS/FOLDER - button to set to the desired hour, then
press the TIMER
button to confirm, the minute digits will then flash, press PS/FOLDER + or PS/FOLDER - button to set
desired minutes, press TIMER button to confirm, the on timer clock is set.
4. Then you will enter into the off timer clock setting, the display will show
“Off Timer” and the “hour”
digit will flash. Press the PS/FOLDER + or PS/FOLDER - button to set to the desired hour, then press
the TIMER button to confirm, the minute digits will then flash, press PS/FOLDER + or PS/FOLDER -
button to set desired minutes, press TIMER button to confirm
, the off timer clock is set.
5. Finally press the PS/FOLDER + or PS/FOLDER - button to select the timer on mode - CD, SD CARD,
USB, FM, DAB, iPod or AUX , then press the TIMER button to confirm. The timer setting is now
completed.
6. To check the
timer setting, repeatedly press the DISPLAY button until the display shows the on timer
and the off timer setting.
F23 F24
PRESET EQ
Press the EQ button to select different preset EQ mode, the display will show in sequence of every press:
ROCK CLASSIC
JAZZ
FLAT
POP
SURROUND SOUND (remote control only)
Press the SURROUND button on the remote control will toggle this function between on and off. The
display will show “SURROUND ON” or “SURROUND OFF”. When the SURROUND is on, the surround
sound effect is activated.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi axm898e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi axm898e in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info