Manual Hitachi 42PMA300A (page 39 of 42) (English)

635124

Zoom out

Zoom in

1/42

ENGLISH

Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below.

OTHER FEATURES

Automatic Store

Menu Display Registration condition

Picture

Picture Mode 1 setting is registered.

Contrast

For every input function and every

Picture Mode, 1 setting is

registered.

Brightness

Color

Sharpness

Tint

Color Temperature

Contrast Mode

YNR

CNR

Film Mode

PAL Comb Filter

LTI

CTI

Black Enhancement

Auto Color

Color Temp. Adjust

R Amplitude

For every Color Temperature, 1

setting is registered.

G Amplitude

B Amplitude

R Cut Off

G Cut Off

B Cut Off

Color Management

For every input function and every

Picture Mode, 1 setting is

registered.

Magenta

1 setting is registered.

Red

Menu Display Registration condition

Picture

Yellow

1 setting is registered.

Green

Cyan

Blue

Color Decoding

Red

For every Color Temperature, 1

setting is registered.

Green

Color

For every input function and every

Picture Mode, 1 setting is

registered.

Tint

Function Video Power Save 1 setting is registered.

Setup

System 1 setting is registered.

Color System

1 setting is registered.

AV1

AV2

AV3

AV4

Video Input -

AV1

1 setting is registered.

AV2

AV4

Audio Input -

AV1

1 setting is registered.

AV2

AV3

AV4

RGB1

RGB2

• The previously recorded items will be lost.

Selected characters Setup hint

Audio Input

AV1

Stereo L/Mono

This should correspond to the audio signal from the equipment that is

connected to AV1 audio input terminal. If it is monaural audio, set this to

L/Mono.

AV2

(Same to AV1)

AV3

AV4

Scart Output

Not Available (grayed out)

RGB1

DVI-PC DVI-STB

This should correspond to the signal mode of the signal from the

equipment that is connected to RGB1 DVI terminal.

RGB2 (1st step)

RGB Component

This should correspond to the signal mode of the signal from the

equipment that is connected to RGB2 D-sub terminal.

RGB2 (2nd step)

Auto HDTV SDTV/DVD

This step should be set only when [Component] is selected on the 1st

step.

This should correspond to the signal mode of the signal from the

equipment that is connected to RGB2 D-sub terminal.

• Normally, set this to Auto. The signal mode of the input signal will be

automatically recognized.

• If the input signal contains much noise or has a low level at Auto and the

operation is found erratic, set this to match the input signal.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi 42PMA300A in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi 42PMA300A Manual

Product: