Load the items to be washed in the drum. Add the detergent
into the relevant compartments for the type of program you
are going to select, see the Detergent Compartment section
on page.
1.Press the Power button
2.Rotate the selector dial to the required program.
3.The display window will show the program length (hours :
minutes), temperature, spin speed and additional function
options.
4.The recommended temperature and spin speed will flash on
the display. Press the Temperature button to set the desired
wash temperature and the spin button to select the spin speed.
To change, or add. Any of the functions press the respective
button and the display will flash. Press the button again until
the chosen option flashes and then press select.
P
rewash
Press the Option button until the Prewash icon flashes and
press Select. Add detergent into the Soak compartment of
the detergent drawer.
This function cannot be selected if you select Eco Wash
function.
Eco wash
Press the Option button until the Eco icon flashes and press
Select. This function is designed to reduce the amount of
electricity, water used and save time during the program.
The Eco icon will continue to flash until the program is
finished.
Rinse hold
Press the Option button until the Rinse Hold icon flashes
and press Select. Selecting this function will keep the
clothing suspended in water after the last rinse, to prevent
the fabrics from creasing. To spin the clothing, and complete
W10658069A
PARAMETER
Washing Capacity
Max.spin speed
Net Weight
Dimension(WXDXH)
Rated Voltage
Heating Power
Washing Power
Model
7.0kg
1200rpm
72kg
600X600X850mm
220V-240V
1900W
300W
WFU7012/WFU7012S
After you have selected your options and placed detergent within
the dispense turn on the water tap and press the Start / Pause
button. The screen will display the current program progression
with icons from left to right. It also displays the remaining
program time.
This model is capable of automatically adjusting the program
to take into account the weight of the load placed inside the
drum. It is possible to cancel this function by pressing the Load
button. The weight of the load can be selected manually.
Load button and the load weight displayed will
increase. The display is the weight in kilograms within the range
allowable for the wash program selected.
Extra rinse
Press the Option button until the Extra Rinse icon flashes and
press Select.
This function cannot be selected if you select Eco Wash function.
Intensive wash
Press the Option button until the Intensive Wash icon flashes
andpress Select. This function will prolong the wash time with
a more intense wash action for washing heavily soiled items.
This function cannot be selected if you select Eco Wash function.
This function will allow to select the time your wash program
will start.
Select Delay after you have selected the program and other
options.
Delay button once and the delay time will increase
by 30 minutes. Press and hold the button and the delay time
will increase by 30 minutes every 0.4 seconds. The delay time
can be programmed for between 30 minutes to 24 hours. To
cancel the selection release the button and then press it again.
as the delay time is the time the program will finish.
For example: if the selected program time is 02:28, the delay
time selected must be between 02:30 and 24:00.
Start /Pause
button and the display will start to count down. When the delay
time is down to the program length time the Delay icon will go
out and the program will start.
Start /Pause button has been
pressed, but before the program has started, it will be necessary
to press the Power button and turn the washing machine off.
Rinse + Spin, Spin.
Delay Function
When the program is finished the display will show “End” and
the washing will turn off after 30 seconds. The door lock will
also release within 2 – 3 minutes.
1.Turn off the water tap.
2.Open the door and remove the washing.
3.Leave the door open slightly to discharge any humidity from
inside.
1.Press the Power button for 2 seconds to shut down the program.
2.Select the new program and options.
3.Press Start / Pause to start the new program without adding any
extra detergent.
The buzzer and alarm can be turned off by pressing the Delay
and Load buttons at the same time for 3 seconds.
To protect children the appliance has a Child Lock function.
This will disable the program selector dial and the option buttons.
Temp and Spin at the
same time for 3 seconds. The display will show SAFE ON and
the Child Lock icon will flash.
After the program starts the Door Lock icon will flash and the
door will be locked.
possible to open the door whilst the icon is flashing and trying
to forcibly open the door will cause damage to the appliance.
press the Start / Pause button. It is important to check the level
of the water inside the drum, and the water temperature, before
trying to open the door.
he
spin program to drain the water from the drum. Switch off the
appliance and open the door.
Safety Notice. If the program is interrupted during the wash the
temperature of the items inside, and the drum, may be very high.
To avoid any scalding, or burns, care must be taken before
removing any items from the drum.
Inlet Water Tap Icon Flashes
If the appliance detects that no water has entered the drum the
Tap icon will flash. Make sure the water tap is turned on and
press the Start / Pause button. If the icon continues to flash
please refer to the user manual Failure Handling Guidance.
the program, press the Start / Pause button. The items can
then be removed straight away after the program has finished.
This function cannot be selected if you select Eco Wash
function.
If you need to add other items of clothing after the program has
started you must check the level of the water inside the drum.
If it safe to open the door press the Start / Pause button.
The door lock indicator will go out and the door can be opened
after 2 – 3 minutes.
he
n
the program to add further items of clothing.
Main Wash
Duration (Min)
Programme
(Min)
Remaining
Moisture
Content (%)
Energy
Consumption
(kWh)
Water
Consumption –
Main Wash (L)
Total Water
Consumption (L)
136 167 167
178 209 209
59 59 55
0.64 0.95 0.92
14 14 19
36 36 50
Programme instructions
1. The standard 60 and 40 cotton programmes,referred to
as ‘standard 60 cotton programme’ and ‘standard 40 cotton
‘standard 60 cotton programme’ and ‘standard 40 cotton
programme’,and that they are suitable to clean normally soiled
cotton laundry and that they are the most efficient programmes
in terms of combined energy and water consumptions for
washing that type of cotton laundry,in addition,the actual water
temperature may differ from the declared cycle temperature.
2. The power consumption of the off-mode is 0.49W,and of
the left-on mode is 0.49W.
3. The type of detergents suitable for the various washing
temperatures.
4. The information of standard programmes:
If this should happen during the program the display will show
a failure code. A description of the failure codes can be found
in the User Manual.
Add detergent, close the door and set the program
Select additional functions
Load
To Start the Program
Adding Clothes After the Program Has Started
To Cancel the Program or Reselect the options
End of the Program
Mute Function
Child lock
Door Lock Icon
Tap Icon
