629507
213
Zoom out
Zoom in
Previous page
1/217
Next page
User Manual of DS-9600/8600/7700/7600 Series NVR
213
FAQ
Why does my NVR make a beeping sound after booting?
The possible reasons for the warning beep on the NVR are as follows:
a) There is no HDD installed in the NVR.
b) The HDD is not initialized.
c) HDD error
To cancel the beeping sound and use the NVR without HDD, enter the Exception Settings interface. For detailed
information, see Chapter Handling Exceptions Alarm.
Why does the NVR seem unresponsive when operating with the IR remote control?
Please read through the section Using the IR Remote Control, and check:
a) The batteries are installed correctly in the remote, making sure that the polarities of the batteries are not
reversed.
b) The batteries are fresh and are not out of power.
c) The remote has not been tampered with.
d) There are no fluorescent lamps in use nearby.
Why does the PTZ seem unresponsive?
If the PTZ seem unresponsive, please check:
a) The RS-485 cable is properly connected.
b) The dome decoder type is correct.
c) The dome decoder speed configuration is correct.
d) The dome decoder address bit configuration is correct.
e) That the main board RS-485 interface is not broken.
Why is there no video recorded after setting the motion detection?
If there are no recorded video after setting the motion detection, please check:
a) The recording schedule is setup correctly by following the steps listed in Configuring Motion Detection
Record and Capture.
b) The motion detection area is configured correctly (See Setup Motion Detection Alarm).
c) The channels are being triggered for motion detection (See Setup Motion Detection Alarm).
Why doesn’t the NVR detect my USB export device for exporting recorded files?
There’s a chance that the NVR and your USB device is not compatible. Please refer to our company’s website to
view a list of compatible devices.
My NVR is in Live View mode and the menu does not show up. It does not respond to the mouse, the
front panel, the remote or keyboard.
Your NVR may be in auxiliary mode. This occurs when the Main/Spot button is pressed on the front panel. To
return to the previous mode of operation, press the button again and then press the Enter button on the front panel.
213


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikvision DS-7608NI-SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikvision DS-7608NI-SE in the language / languages: English as an attachment in your email.

The manual is 9,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hikvision DS-7608NI-SE

Hikvision DS-7608NI-SE Quick start guide - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info