488783
41
Zoom out
Zoom in
Previous page
1/44
Next page
41
7 Additional information
Display messages relating to recording
Note: In the table below, ** indicates a track number.
If digital synchro-recording fails to operate correctly, check the
following:
1. Pause playback of the source, then press the DIGITAL SYNCHRO button again.
If you’re recording from a portable CD player, etc., make sure that the shock-protection feature is
switched off.
2. Start playback of the source component once you see the SYNCHRO indicator start to blink.
3. If none of the above solves the problem, use manual digital recording to record.
Digital synchro-recording uses a digital sub-signal contained in the source player’s digital output.
Digital synchro-recording will not work when recording from the following devices:
CD players whose digital output does not include a sub-signal
Portable CD, MD or DVD players which do not output a digital signal when stopped.
Display Cause Remedy
Can't
SYNC
This appears when the
SYNCHRO button is pressed
when the input selector is set
to a digital input, and the
source selected is not
recognized as CD, MD, DCC,
or DAT.
Record the source manually, or record through the
analog input.
DIN
UNLOCK
The digital source was
interrupted.
The source is not audio, or is
an incompatible format (e.g.
a CD-ROM).
Check that the digital input cable is connected properly
and that the power of the source player is on.
Check that the source is a regular music source.
CHECK
INPUT?
The source player was
already playing when the
SYNCHRO button was
pressed.
Stop the source player. After a short time, SYNC–1 or
SYNC–ALL is displayed, and the recorder goes into
synchro–record-pause mode.
**
**
**
**
SET UP
The unit is preparing to
record.
Wait until the message disappears.
REPAIR
The recorder was switched
off/unplugged after
recording without ejecting
the disc. The recorder could
not write essential recording
information onto the disc.
While REPAIR is displayed, the recorder automatically
examines the recorded area of the disc and updates the
track numbers and recording time data. This process
takes about 40 minutes for a fully recorded disc.
Finalization or further recording is possible once the
REPAIR message disappears.
REC FULL
No more recording is
possible because the
available recording time of
the disc has been used up, or
99 tracks have already been
recorded on the disc.
Use another disc, or erase the CD-RW disc.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HHB CDR-830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HHB CDR-830 in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info