742601
4
Zoom out
Zoom in
Previous page
1/144
Next page
4
EN
¨ Heater does not reach a proper temperature. A temperature less than 5ºC will cause
restricted heat flow and the appliance will not work properly.
¨ The appliance starts making popping noises during use (a slight popping noise is nor
-
mal when the appliance is extinguished).
The regulator & hose assembly must be located out of pathways where people may trip
over it or in area where the hose will not be subject to accidental damage.
Any guard or other protective device removed for servicing the heater must be replaced
before operating the heater.
Children and adults should be warned of the hazards of high surface temperatures and
should stay away to avoid burns or clothing ignition.
Young children and pets should be carefully supervised when they are in the area of the
heater.
Clothing or other flammable materials should not be hung from the appliance, or placed
on or near the appliance.
Do not place articles on or against this appliance. Certain material or items when stored
under or near this appliance will be subjected to radiant heat and could be seriously
damaged.
Do not use or store flammable materials near this appliance.
Do not spray aerosols in the vicinity of this appliance while it is in operation.
Always maintain at least 0.9m clearance from combustible materials.
Always position the appliance on a firm level surface. An amply ventilated area must have
a minimum of 25% of the surface area open. The surface area is the sum of the walls
surface.
The injector in this appliance is not removable and the injector is only assembled by
manufacture. This appliance is forbidden to convert from one gas pressure to another
pressure.
Do not connect the gas cylinder directly to the appliance without regulator.
Intended use
The device is intended for professional use and
can be operated only by qualified personnel.
The appliance is designed only for heating out-
doors or well ventilated areas. Any other use may
lead to damage to the appliance or personal in-
jury.
Operating the appliance for any other purpose
shall be deemed a misuse of the device. The user
shall be solely liable for improper use of the de-
vice.
Part List
Assembly parts supplied:
5pcs bolts M5 x 12 and 5pcs washers M5 for rear panel of housing and base.
5pcs bolts M5 x 12 and 5pcs washers M5 for rear panel of housing and housing lid.
3pcs bolts M5 x 12 and 3pcs washers M5 for connection of post assembly.
4pcs bolts M6 x 12 and 4pcs washers M6 for the post and housing lid.
9pcs bolts M6 x 8, 12pcs wing nuts M6 and 12pcs washers M6 for reflector.
3pcs bolts M5 x 12 and 3pcs washers M5 for main burner and the post.
6pcs bolts M5 x 8 and 6pcs washers M5 for base stands and base.
2pcs bolts M8 x 12, 4pcs washers M8 and 2pcs M8 nuts for wheels assembly.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 272701 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 272701 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info