Manual Hendi 272602 (page 3 of 144) (English, German, Dutch, French, Italian, Polish)

742600

Zoom out

Zoom in

1/144

Dear Customer,

Thank you for purchasing this Hendi appliance. Please read this manual carefully before connecting the

appliance in order to prevent damage due to incorrect use. Read the safety regulations in particular very

carefully.

Safety regulations

• This appliance must be used outdoors or in a well ventilated area, and should not be

installed or used indoors.

• Change the gas cylinder in a well ventilated area, away from any inﬂammation sources.

• The cylinder must be stored outdoors or in a well ventilated area.

• Storage this appliance indoors is permissible only if gas cylinder is disconnected and

removed from the appliance.

• Do not move this appliance when in operation, or after it has been turned off before the

temperature has cooled down.

• Do not attempt to alter the appliance in any manner. Do not paint the radiant screen,

control panel or reﬂector.

• Do not obstruct the ventilation holes of the cylinder housing.

• The appliance must be installed and gas cylinder stored in accordance with local gas

ﬁtting regulations.

• Shut off the valve at the gas cylinder or the regulator before moving the appliance.

• Use only the type of gas speciﬁed by the manufacturer.

• Repairs should be done by a qualiﬁed person.

• In case of violent wind, particular attention must be taken against tilting of the appliance.

• Check that the regulator seal is correctly ﬁtted and able to fulﬁl its function.

• Close the gas supply at the valve of the gas cylinder or the regulator after use.

• Do not use this appliance until all connections have been leak tested.

• In the event of gas leakage, the appliance shall not be used or if alight, the gas supply

shall be shut off and the appliance shall be investigated and rectiﬁed before it is used

again.

• Checking the tubing or the ﬂexible hose per month and each time the cylinder is changed.

• The tubing or the ﬂexible hose must be changed within the prescribed intervals or with

in one year. The ﬂexible hose should not extended than 1.5m according to standard

EN16436:2014.

• The hose assembly must be replaced prior to the appliance being put into operation if

there is evidence of excessive abrasion or wear, or if the hose is damaged, and that the

replacement hose assembly shall be that speciﬁed by the manufacturer.

• The heater should be inspected before use and at least annually by a qualiﬁed service

person. More frequent cleaning may be required as necessary. It is imperative that control

compartment, burners and circulating air passageways of the appliance be kept clean.

• Shut off and check heater immediately if any of the following conditions exist:

¨ The smell of gas in conjunction with extreme yellow tipping of the burner ﬂames.

NLEN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 272602 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 272602 Manual

Product: